File:US 1ADSSI.PNG

Commons – repozytorium wolnych multimediów
Przejdź do nawigacji Przejdź do wyszukiwania

US_1ADSSI.PNG(138 × 142 pikseli, rozmiar pliku: 8 KB, typ MIME: image/png)

Podpisy

Podpisy

Dodaj jednolinijkowe objaśnienie tego, co ten plik pokazuje

Opis[edytuj]

Opis
English: 1st Armored Division Shoulder Sleeve Insignia[1].
Data
Źródło US Army Institute of Heraldry
Autor
English: United States Army
Licencja
(Ponowne użycie tego pliku)
Public domain
This image shows a flag, a coat of arms, a seal or some other official insignia produced by the United States Army Institute of Heraldry. It is in the public domain but its use is restricted by Title 18, United States Code, Section 704 [1] and the Code of Federal Regulations (32 CFR, Part 507) [2], [3]. Permission to use these images in the USA for most commercial purposes must be obtained from The Institute of Heraldry prior to their use.

Deutsch  English  فارسی  日本語  русский  +/−

English: US Army Institute of Heraldry


Blazon:[edytuj]

Shoulder Sleeve Insignia[edytuj]

  • Description:
  1. An equilateral triangle, one point up, above a horizontal tab attached in base, the overall dimensions of triangle and tab is 4 1/16 inches in height and 3 7/8 inches in width.
  2. The triangle is divided into three sections, the upper section yellow, the dexter section blue and the sinister section red, overall a gun bendwise in front of a tank track and wheels all black surmounted by a red lightning flash bendwise sinister.
  3. In the apex the Arabic numeral "1" in black, all within a 1/8 inch green border.
  4. The tab is yellow with a 1/8 inch green border with the inscription "OLD IRONSIDES" in black letters 5/16 inch in height.

Combat Service Identification Badge[edytuj]

  • A silver color metal and enamel device 2 inches (5.08 cm) in height consisting of a design similar to the shoulder sleeve insignia.

Symbolism[edytuj]

  1. Yellow, blue, and red are the colors of the branches from which armored units were formed.
  2. The tank tread, gun, and lightning flash are symbolic of mobility, power, and speed.
  3. The division's designation is in Arabic numerals.

Background[edytuj]

  1. The shoulder sleeve insignia was originally approved without the tab on 1940-11-22.
  2. The tab was authorized as a separate item on 1956-02-21.
  3. The insignia was changed to a one-piece insignia on 1970-11-05.
  4. (TIOH Dwg. No. A-1-330)

Notes[edytuj]

  1. The Shoulder Sleeve Insignia is worn on all uniforms except the Blue Service Uniform.
    The Combat Service Identification Badge is a simplified miniature version of the SSI, and is worn on the Blue Service Uniform.

Historia pliku

Kliknij na odpowiedniej dacie/czasie, aby zobaczyć wersję pliku z tamtego okresu.

Data/czasMiniaturaWymiaryUżytkownikOpis
aktualny06:31, 28 lis 2005Miniatura wersji z 06:31, 28 lis 2005138 × 142 (8 KB)CORNELIUSSEON (dyskusja | edycje)SHOULDER SLEEVE INSIGNIA. Description: An equilateral triangle, one point up, above a horizontal tab attached in base, the overall dimensions of triangle and tab is 4 1/16 inches in height and 3 7/8 inches in width. The triangle is divided into three sect

Żadna strona nie korzysta z tego pliku.

Globalne wykorzystanie pliku

Ten plik jest wykorzystywany także w innych projektach wiki: