Category:Washers (hardware)
Jump to navigation
Jump to search
thin plate with a hole, normally used to distribute the load of a threaded fastener  | |||||
| Upload media | |||||
| Subclass of |
| ||||
|---|---|---|---|---|---|
| Part of | |||||
| Has use |
| ||||
| Physically interacts with | |||||
| Partially coincident with | |||||
| |||||
 | |||||
Library of Congress authority ID: Subcategories
This category has the following 6 subcategories, out of 6 total.
Media in category "Washers (hardware)"
The following 80 files are in this category, out of 80 total.
- De-Beilagscheibe.ogg 2.0 s; 20 KB
- De-Unterlegscheibe.ogg 2.2 s; 22 KB
"sealing" washers (100757402).jpg 1,489 × 778; 824 KB
ARFISA 15.jpg 514 × 474; 107 KB
Belleville washer with rubber back.tif 1,527 × 1,026; 6.54 MB
Bolt with washer.jpg 900 × 769; 167 KB
Both spacers over head view.JPG 3,456 × 3,150; 1.99 MB
Burnt washer.JPG 5,184 × 3,456; 2.41 MB
Bügelflaschen swingtop mechanism closeup.jpg 565 × 448; 168 KB
Calibro di plastica con rondella 1.jpg 1,978 × 752; 125 KB
Clip washers.jpg 478 × 640; 89 KB
CLose up of washer vice system.JPG 5,184 × 3,456; 2.35 MB
Collar (machinery) (PSF).jpg 201 × 206; 4 KB
Completed board.JPG 2,448 × 3,264; 2.15 MB
Delta (Dacromet).jpg 2,048 × 1,536; 551 KB
Din 432.jpg 517 × 521; 118 KB
Din 434.jpg 527 × 454; 26 KB
Din 435.jpg 554 × 436; 26 KB
Din 436.jpg 631 × 449; 40 KB
Duplicate washer system without spacers.JPG 5,184 × 3,456; 3.2 MB
Elictrical tape left over.JPG 1,822 × 1,342; 941 KB
Femur, Fractura, Collum femoris, Screws, Washers, RTG.png 364 × 401; 116 KB
First 2 washers.jpg 3,264 × 1,836; 1.38 MB
First row of washers.JPG 2,448 × 3,264; 1.76 MB
Glued down washer with wires coiled.JPG 5,184 × 3,456; 3.17 MB
Gluing the holes.JPG 3,264 × 2,448; 1.92 MB
Hira.jpg 800 × 562; 45 KB
Insulating fiberglass washers for M3.jpg 3,400 × 2,267; 1.44 MB
Kikuza.jpg 800 × 562; 66 KB
M20 Direct Tension Indicators Washer.png 1,280 × 687; 1.08 MB
M30 Direct Tension Indicators Washer.png 771 × 687; 906 KB
Made vice for washer cutting.JPG 5,184 × 3,456; 2.18 MB
Me holding spacer in place.JPG 5,184 × 3,456; 2.87 MB
Multimeter testing duplicate washer system.JPG 5,184 × 3,456; 2.34 MB
Number6nut.JPG 640 × 480; 57 KB
Number6washers.JPG 640 × 480; 57 KB
Overhead of top spacer.JPG 5,184 × 3,456; 2.1 MB
Overhead view of duplicate washer system.JPG 5,184 × 3,456; 2.87 MB
Ringen.jpg 1,024 × 768; 200 KB
Sacer fitting into original working washer system model.JPG 5,184 × 3,456; 1.8 MB
Schrauben, Muttern und Unterlegscheiben -- 2020 -- 4150 (bw).jpg 6,720 × 4,480; 10.16 MB
Selbstdichtenden Unterlegscheibe Usit Ring Schnitt.svg 3,250 × 1,350; 3 KB
Side view of both spacers in duplicate washer system.JPG 5,184 × 3,456; 3.11 MB
Side view of both spacers in original washer system.JPG 5,184 × 3,456; 1.77 MB
Side view of spacer in bottom gap.JPG 4,180 × 3,017; 2.32 MB
Side view of top gap spacer.JPG 5,184 × 3,456; 1.67 MB
Siliconewasherglueddown.JPG 640 × 480; 58 KB
Single hole in plexiglass idea.JPG 5,184 × 3,456; 3.06 MB
Spint Montiert01.jpg 1,536 × 1,024; 325 KB
Spring (bolt).jpg 800 × 569; 52 KB
Testing original washer system with multimeter.JPG 5,184 × 3,456; 2.43 MB
The row of washers.JPG 2,448 × 3,264; 2.36 MB
The tape and washer.JPG 2,448 × 3,264; 1.72 MB
The washer being taped.JPG 2,448 × 3,264; 2.22 MB
The washer.JPG 320 × 240; 29 KB
The white marks from the glue.JPG 2,448 × 3,264; 1.84 MB
The wire is now longer.jpeg 2,448 × 3,264; 1.87 MB
The wire is too short.jpeg 2,448 × 3,264; 1.79 MB
Thrust Washer Kits 01.jpg 4,160 × 2,340; 1.99 MB
Thrust Washer Kits 02.jpg 4,160 × 2,340; 1.29 MB
Thrust Washer Kits.jpg 4,160 × 2,340; 1.4 MB
Tornillo.JPG 3,072 × 2,304; 1.27 MB
Underneath view of working design.JPG 5,184 × 3,456; 3.1 MB
Unterlegscheiben, Mini-Skyline -- 2020 -- 3875.jpg 6,667 × 4,445; 13 MB
Up close view of solder.JPG 360 × 480; 34 KB
Vice holding washer.JPG 5,184 × 3,456; 2.54 MB
Vicewasher.JPG 640 × 480; 55 KB
Washer soldered onto the board.JPG 360 × 480; 37 KB
Washer template.JPG 360 × 480; 38 KB
Washerandscrew.JPG 640 × 480; 137 KB
Washeratopboard.JPG 640 × 480; 55 KB
Washers in a transparent zipper storage bag - A.jpg 2,312 × 3,083; 1.63 MB
Washers in a transparent zipper storage bag - B.jpg 3,456 × 4,608; 1.98 MB
Washers.agr.jpg 692 × 599; 65 KB
Washerwiringcrimps.JPG 640 × 480; 140 KB
Wiring the washers.JPG 3,264 × 2,448; 1.98 MB
WoodDeck-2797.jpg 2,816 × 2,112; 2.71 MB
Zoomed out view hole in center of washer.JPG 5,184 × 3,456; 3.07 MB
ノルトロックワッシャー.png 400 × 399; 102 KB
ノルトロックワッシャーのバリエーション.png 1,168 × 364; 309 KB
.jpg)
_(PSF).jpg)
.jpg)
.jpg)
.jpg)
