Category:Washers (hardware)
Sari la navigare
Sari la căutare
thin plate with a hole, normally used to distribute the load of a threaded fastener  | |||||
| Încarcă multimedia | |||||
| Subclasă a |
| ||||
|---|---|---|---|---|---|
| Parte din | |||||
| Utilizare |
| ||||
| Interacționează fizic cu | |||||
| Coincident parțial cu | |||||
| |||||
 | |||||
identificator LCCN: Subcategorii
Această categorie conține următoarele 6 subcategorii, dintr-un total de 6.
B
- Belleville washers (12 F)
D
- Drawings of washers (10 F)
L
P
- Plain washers (24 F)
T
- Tab washers (4 F)
W
Fișiere media din categoria „Washers (hardware)”
Următoarele 81 fișiere se află în această categorie, dintr-un total de 81.
- De-Beilagscheibe.ogg 2,0 s; 20 KB
- De-Unterlegscheibe.ogg 2,2 s; 22 KB
"sealing" washers (100757402).jpg 1.489x778; 824 KB
ARFISA 15.jpg 514x474; 107 KB
Belleville washer with rubber back.tif 1.527x1.026; 6,54 MB
Bolt with washer.jpg 900x769; 167 KB
Both spacers over head view.JPG 3.456x3.150; 1,99 MB
Burnt washer.JPG 5.184x3.456; 2,41 MB
Bügelflaschen swingtop mechanism closeup.jpg 565x448; 168 KB
Calibro di plastica con rondella 1.jpg 1.978x752; 125 KB
Clip washers.jpg 478x640; 89 KB
CLose up of washer vice system.JPG 5.184x3.456; 2,35 MB
Collar (machinery) (PSF).jpg 201x206; 4 KB
Completed board.JPG 2.448x3.264; 2,15 MB
Delta (Dacromet).jpg 2.048x1.536; 551 KB
Din 432.jpg 517x521; 118 KB
Din 434.jpg 527x454; 26 KB
Din 435.jpg 554x436; 26 KB
Din 436.jpg 631x449; 40 KB
Duplicate washer system without spacers.JPG 5.184x3.456; 3,2 MB
Elictrical tape left over.JPG 1.822x1.342; 941 KB
Femur, Fractura, Collum femoris, Screws, Washers, RTG.png 364x401; 116 KB
Fender washer.tif 1.533x1.911; 11,74 MB
First 2 washers.jpg 3.264x1.836; 1,38 MB
First row of washers.JPG 2.448x3.264; 1,76 MB
Glued down washer with wires coiled.JPG 5.184x3.456; 3,17 MB
Gluing the holes.JPG 3.264x2.448; 1,92 MB
Hira.jpg 800x562; 45 KB
Insulating fiberglass washers for M3.jpg 3.400x2.267; 1,44 MB
Kikuza.jpg 800x562; 66 KB
M20 Direct Tension Indicators Washer.png 1.280x687; 1,08 MB
M30 Direct Tension Indicators Washer.png 771x687; 906 KB
Made vice for washer cutting.JPG 5.184x3.456; 2,18 MB
Me holding spacer in place.JPG 5.184x3.456; 2,87 MB
Multimeter testing duplicate washer system.JPG 5.184x3.456; 2,34 MB
Number6nut.JPG 640x480; 57 KB
Number6washers.JPG 640x480; 57 KB
Overhead of top spacer.JPG 5.184x3.456; 2,1 MB
Overhead view of duplicate washer system.JPG 5.184x3.456; 2,87 MB
Ringen.jpg 1.024x768; 200 KB
Sacer fitting into original working washer system model.JPG 5.184x3.456; 1,8 MB
Schrauben, Muttern und Unterlegscheiben -- 2020 -- 4150 (bw).jpg 6.720x4.480; 10,16 MB
Selbstdichtenden Unterlegscheibe Usit Ring Schnitt.svg 3.250x1.350; 3 KB
Side view of both spacers in duplicate washer system.JPG 5.184x3.456; 3,11 MB
Side view of both spacers in original washer system.JPG 5.184x3.456; 1,77 MB
Side view of spacer in bottom gap.JPG 4.180x3.017; 2,32 MB
Side view of top gap spacer.JPG 5.184x3.456; 1,67 MB
Siliconewasherglueddown.JPG 640x480; 58 KB
Single hole in plexiglass idea.JPG 5.184x3.456; 3,06 MB
Spint Montiert01.jpg 1.536x1.024; 325 KB
Spring (bolt).jpg 800x569; 52 KB
Testing original washer system with multimeter.JPG 5.184x3.456; 2,43 MB
The row of washers.JPG 2.448x3.264; 2,36 MB
The tape and washer.JPG 2.448x3.264; 1,72 MB
The washer being taped.JPG 2.448x3.264; 2,22 MB
The washer.JPG 320x240; 29 KB
The white marks from the glue.JPG 2.448x3.264; 1,84 MB
The wire is now longer.jpeg 2.448x3.264; 1,87 MB
The wire is too short.jpeg 2.448x3.264; 1,79 MB
Thrust Washer Kits 01.jpg 4.160x2.340; 1,99 MB
Thrust Washer Kits 02.jpg 4.160x2.340; 1,29 MB
Thrust Washer Kits.jpg 4.160x2.340; 1,4 MB
Tornillo.JPG 3.072x2.304; 1,27 MB
Underneath view of working design.JPG 5.184x3.456; 3,1 MB
Unterlegscheiben, Mini-Skyline -- 2020 -- 3875.jpg 6.667x4.445; 13 MB
Up close view of solder.JPG 360x480; 34 KB
Vice holding washer.JPG 5.184x3.456; 2,54 MB
Vicewasher.JPG 640x480; 55 KB
Washer soldered onto the board.JPG 360x480; 37 KB
Washer template.JPG 360x480; 38 KB
Washerandscrew.JPG 640x480; 137 KB
Washeratopboard.JPG 640x480; 55 KB
Washers in a transparent zipper storage bag - A.jpg 2.312x3.083; 1,63 MB
Washers in a transparent zipper storage bag - B.jpg 3.456x4.608; 1,98 MB
Washers.agr.jpg 692x599; 65 KB
Washerwiringcrimps.JPG 640x480; 140 KB
Wiring the washers.JPG 3.264x2.448; 1,98 MB
WoodDeck-2797.jpg 2.816x2.112; 2,71 MB
Zoomed out view hole in center of washer.JPG 5.184x3.456; 3,07 MB
ノルトロックワッシャー.png 400x399; 102 KB
ノルトロックワッシャーのバリエーション.png 1.168x364; 309 KB
.jpg)
_(PSF).jpg)
.jpg)
.jpg)
.jpg)
