File:After using a butt marker to chisel out hole for door hinge.JPG
Jump to navigation Jump to search
Original file (727 × 603 pixels, file size: 115 KB, MIME type: image/jpeg)
English: When installing a new interior door, often it is necessary to remove wood so the metal hinge can fit snugly against the side of the door. The broken door (above) with the hinge removed shows what the end result should look like. The best way to make a similar hole is to use a butt marker to outline where the hinge should go, then shave off the wood to the right depth (approximately 1/8 inch?) using a Dremel or chisel, then drill three holes for the hinge screw, then attach the hinge (the lower door).
Click on a date/time to view the file as it appeared at that time.
|current||13:26, 26 May 2014||727 × 603 (115 KB)||Tomwsulcer||User created page with UploadWizard|
- You cannot overwrite this file.
File usage on Commons
File usage on other wikis
The following other wikis use this file:
- Usage on en.wikipedia.org