File:Breitling Orbiter 3 - Smithsonian Air and Space Museum - 2012-05-15 (7275641372).jpg

From Wikimedia Commons, the free media repository
Jump to navigation Jump to search

Original file(1,461 × 1,500 pixels, file size: 833 KB, MIME type: image/jpeg)

Captions

Captions

Add a one-line explanation of what this file represents

Summary[edit]

Description

The Breitling Orbiter 3 was the first balloon to fly around the world non-stop. This is the gondola, on display at the Smithsonian Air and Space Museum in Washington, D.C.

The Breitling Orbiter 3 was the third of three balloons piloted by Bertrand Piccard and Brian Jones. Both prior attempts to fly around the world ended in crashes. Its balloon was 180 feet high when inflated. Propane gas was used to heat the air, and these 28 propane cylinders were attached to both sides of the gondola (you can see them in this photo). The balloon was a Rozière balloon, which means that a central core gas bag of helium was surrounded by an outer gas bag of hot air. The helium bag was filled about halfway to capacity. As the craft rose, the lack of surrounding air pressure as well as heating by the Sun caused the helium to expand -- filling the gas bag to 100 percent of capacity, and causing the gondola to rise.

The gondola was made of Kevlar and a carbon fiber material. The cabin remained open until the balloon reached 6,000 (to allow for air pressure drops. It was then sealed, and a nitrogen/oxygen mix used to augment the air inside it. Carbon dioxide scrubbers removed the CO2 from the sealed cabin. The gondola had solar panels underneath it, which generated power for the satellite GPS system and radio.

Piccard and Jones took off from Switzerland on March 1, 1999, and landed in Egypt on March 21, 1999. They traveled 25,361 miles.
Date
Source Breitling Orbiter 3 - Smithsonian Air and Space Museum - 2012-05-15
Author Tim Evanson from Cleveland Heights, Ohio, USA

Licensing[edit]

w:en:Creative Commons
attribution share alike
This file is licensed under the Creative Commons Attribution-Share Alike 2.0 Generic license.
You are free:
  • to share – to copy, distribute and transmit the work
  • to remix – to adapt the work
Under the following conditions:
  • attribution – You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
  • share alike – If you remix, transform, or build upon the material, you must distribute your contributions under the same or compatible license as the original.
This image was originally posted to Flickr by Tim Evanson at https://flickr.com/photos/23165290@N00/7275641372 (archive). It was reviewed on 11 February 2018 by FlickreviewR 2 and was confirmed to be licensed under the terms of the cc-by-sa-2.0.

11 February 2018

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current07:28, 11 February 2018Thumbnail for version as of 07:28, 11 February 20181,461 × 1,500 (833 KB)Donald Trung (talk | contribs)Transferred from Flickr via Flickr2Commons

Metadata