File:Dye laser alignment intra-cavity beam @ 589nm.jpg
Une page de Wikimedia Commons, la médiathèque libre.
Aller à la navigation
Aller à la recherche
- Fichier
- Historique du fichier
- Utilisations locales du fichier
- Utilisations du fichier sur d’autres wikis
- Métadonnées
Taille de cet aperçu : 800 × 284 pixels. Autres résolutions : 320 × 114 pixels | 640 × 227 pixels | 1 024 × 363 pixels | 1 280 × 454 pixels | 5 664 × 2 009 pixels.
Fichier d’origine (5 664 × 2 009 pixels, taille du fichier : 1,56 Mio, type MIME : image/jpeg)
Informations sur le fichier
Données structurées
Légendes
Description
[modifier]DescriptionDye laser alignment intra-cavity beam @ 589nm.jpg |
English: The internal cavity of a Coherent Inc. model 740 dye laser is exposed during alignment of the optics. The frequency-doubled Nd:YAG laser enters the dye cell from the left, to "pump" the dye into a fluorescent state, where it will be ready to emit stimulated radiation. The fluorescence from the dye is reflected between the end mirrors, which consists of a diffraction grating (upper left of center) on one end of the beam and a cavity dumper, in the form of an acousto-optic modulator (beyond the right edge), on the other end, which is used as the output coupler. The beam goes through several stages of expansion, folding and contraction using a variety of curved mirrors, flat mirrors and prisms, adjusting it to the optimum size for each stage of the cavity. The cavity length is 1.97 meters, although the mirrors allow for it to be mounted in a shorter case. The dye cell is placed closer to one end of the cavity, because two waves are emitted from the cell in opposite directions. In this way, the wave on the shorter end of the cavity returns to the dye cell first, using most of its energy, and the other wave is eventually extinguished. This allows full gain from only one wave and a very short pulse of light can be extracted. The laser is capable of continuous wave operation or ultrafast picosecond pulses. The laser was photographed during a mirror-alignment procedure, allowing better imaging of the beam. The external laser used for alignment is 589 nm and is much brighter than the actual beam would be. The pump laser is shown for demonstration purposes, but at very low power (30 mw) in order to match the brightness of the 50 mw yellow beam. (In normal operation the pump laser would be much brighter than the intra-cavity beam, making it very difficult to photograph. |
Date | |
Source | Travail personnel |
Auteur | Zaereth |
Conditions d’utilisation
[modifier]Moi, en tant que détenteur des droits d’auteur sur cette œuvre, je la publie sous la licence suivante :
Ce fichier est sous la licence Creative Commons Attribution – Partage dans les Mêmes Conditions 4.0 International.
- Vous êtes libre :
- de partager – de copier, distribuer et transmettre cette œuvre
- d’adapter – de modifier cette œuvre
- Sous les conditions suivantes :
- paternité – Vous devez donner les informations appropriées concernant l'auteur, fournir un lien vers la licence et indiquer si des modifications ont été faites. Vous pouvez faire cela par tout moyen raisonnable, mais en aucune façon suggérant que l’auteur vous soutient ou approuve l’utilisation que vous en faites.
- partage à l’identique – Si vous modifiez, transformez, ou vous basez sur cette œuvre, vous devez distribuer votre contribution sous la même licence ou une licence compatible avec celle de l’original.
Historique du fichier
Cliquer sur une date et heure pour voir le fichier tel qu'il était à ce moment-là.
Date et heure | Vignette | Dimensions | Utilisateur | Commentaire | |
---|---|---|---|---|---|
actuel | 5 mars 2017 à 10:25 | 5 664 × 2 009 (1,56 Mio) | Zaereth (d | contributions) | Better quality photo, better focus, better smoke distribution, and done after properly aligning. | |
2 février 2017 à 12:30 | 3 800 × 1 385 (762 kio) | Zaereth (d | contributions) | User created page with UploadWizard |
Vous ne pouvez pas remplacer ce fichier.
Utilisations locales du fichier
Aucune page n’utilise ce fichier.
Utilisations du fichier sur d’autres wikis
Les autres wikis suivants utilisent ce fichier :
- Utilisation sur en.wikipedia.org
- Utilisation sur es.wikipedia.org
- Utilisation sur fr.wikipedia.org
Métadonnées
Ce fichier contient des informations supplémentaires, probablement ajoutées par l'appareil photo numérique ou le numériseur utilisé pour le créer.
Si le fichier a été modifié depuis son état original, certains détails peuvent ne pas refléter entièrement l'image modifiée.
Fabricant de l’appareil photo | SONY |
---|---|
Modèle de l’appareil photo | ILCE-6000 |
Durée d’exposition | 1/4 s (0,25 s) |
Ouverture focale | f / 5,6 |
Sensibilité ISO (vitesse d’obturation) | 3 200 |
Date et heure de génération des données | 5 mars 2017 à 01:31 |
Orientation | Normale |
Résolution horizontale | 350 pt/po |
Résolution verticale | 350 pt/po |
Logiciel utilisé | ILCE-6000 v3.10 |
Date de modification du fichier | 5 mars 2017 à 01:31 |
Positionnement YCbCr | Centré |
Version d’EXIF | 2.3 |
Date et heure de la numérisation | 5 mars 2017 à 01:31 |
Signification de chaque composante |
|
Vitesse d’obturation APEX | 2 |
Ouverture APEX | 4,9708557128906 |
Biais de compensation d’exposition APEX | 5 |
Flash | Flash non déclenché, suppression du flash obligatoire |
Version de FlashPix prise en charge | 1 |
Espace colorimétrique | sRGB |
Source du fichier | Appareil photo numérique |
Rendu d’image personnalisé | Procédé personnalisé |
Mode d’exposition | Exposition manuelle |
Balance des blancs | Balance des blancs automatique |
Taux de zoom numérique | 1 |
Type de capture de la scène | Standard |