File:WPPressGaugeDetailHC.jpg
WPPressGaugeDetailHC.jpg (504 × 495 pixelů, velikost souboru: 59 KB, MIME typ: image/jpeg)
Popisky
Obsah
Popis[editovat]
PopisWPPressGaugeDetailHC.jpg |
English: Mechanics of a pressure gauge, annotated
Annotated internals of a pressure gauge, contrast enhanced. Mechanical detailsStationary parts:A: Receiver block. This joins the inlet pipe to the fixed end of the Bourdon tube (1) and secures the chassies plate (B). The two holes receive screws that secure the case. B: Chassies Plate. The face card is attached to this on the opposite side. It contains bearing holes for the axles. C: Secondary Chassis Plate. It supports the outer ends of the axles. D: Posts to join and space the two chassis plates. Moving Parts1: Stationary end of Bourdon tube. This communicates with the inlet pipe through the receiver block. 2: Moving end of bourdon tube. This end is sealed. 3: Pivot and pivot pin. 4: Link joining pivot pin to lever (5) with pins to allow joint rotation. 5: Lever. This an extension of the sector gear (7). 6: Sector gear axle pin. 7: Sector gear. 8: Indicator needle axle. This has a spur gear that engages the sector gear (7) and extends through the face to drive the indicator needle. Due to the short distance between the lever arm link boss and the pivot pin and the difference between the effective radius of the sector gear and that of the spur gear, any motion of the bourden tube is greatly amplified. A small motion of the tube results in a large motion of the indicator needle. 9: Hair spring to preload the gear train to reduce gear lash and hysteresis. |
Datum |
4 April 2004 |
Zdroj | Transferred from en.wikipedia. |
Autor | Leonard G. at en.wikipedia |
Licence[editovat]
Public domainPublic domainfalsefalse |
Uživatel Leonard G. z projektu v jazyce {{{6}}}, autor tohoto díla, jej uvolnil jako volné dílo, a to celosvětově. Není-li to podle zákona možné: |
Původní historie souboru[editovat]
- 2004-04-22 19:25 Leonard G. 504×495× (60279 bytes) Improved contrast annotated pressure gauge image
- 2004-04-22 19:17 Leonard G. 506×495× (70754 bytes) improved contrast image of pressure gauge internals
- 2004-04-04 16:53 Leonard G. 510×495× (53370 bytes) Mechanics of a pressure gauge, annotated
Historie souboru
Kliknutím na datum a čas se zobrazí tehdejší verze souboru.
Datum a čas | Náhled | Rozměry | Uživatel | Komentář | |
---|---|---|---|---|---|
současná | 14. 1. 2012, 21:52 | 504 × 495 (59 KB) | OgreBot (diskuse | příspěvky) | (BOT): Reverting to most recent version before archival | |
14. 1. 2012, 21:52 | 504 × 495 (59 KB) | OgreBot (diskuse | příspěvky) | (BOT): Uploading old version of file from en.wikipedia; originally uploaded on 2004-04-22 19:25:22 by Leonard G. | ||
3. 9. 2005, 18:11 | 504 × 495 (59 KB) | Saperaud~commonswiki (diskuse | příspěvky) | Annotated internals of a pressure gauge, contrast enhanced. ==Mechanical details== ===Stationary parts:=== '''A:''' Receiver block. This joins the inlet pipe to the fixed end of the Bourdon tube (1) and secures the chassies plate (B). The two holes rec |
Tento soubor nemůžete přepsat.
Využití souboru
Na Commons na soubor odkazuje tato stránka:
Globální využití souboru
Tento soubor využívají následující wiki:
- Využití na ca.wikipedia.org
- Využití na cs.wikipedia.org
- Využití na de.wikipedia.org
- Využití na en.wikipedia.org
- Využití na es.wikipedia.org
- Využití na fr.wikipedia.org
- Využití na hr.wikipedia.org
- Využití na ja.wikipedia.org
- Využití na vi.wikipedia.org
Metadata
Tento soubor obsahuje dodatečné informace, poskytnuté zřejmě digitálním fotoaparátem nebo scannerem, kterým byl pořízen. Pokud byl soubor od té doby změněn, některé údaje mohou být neplatné.
Poznámky ze souboru JPEG | File written by Adobe Photoshop¨ 5.2 |
---|