File:2016AZ8 Radar.gif

Non sono disponibili versioni a risoluzione più elevata.

2016AZ8_Radar.gif ‎(400 × 400 pixel, dimensione del file: 574 KB, tipo MIME: image/gif, ciclico, 7 frame, 1,4 s)

Didascalie

italiano

Aggiungi una brevissima spiegazione di ciò che questo file rappresenta

Dettagli

Descrizione2016AZ8 Radar.gif	English: Range-Doppler radar images of near-Earth asteroid 2016 AZ8 with range resolution (vertical axis) of 7.5 m/pixel and Doppler frequency resolution (horizontal axis) of 0.03 Hz where the sequence of images over the almost 40 min of data and (right) is the first frame, obtained over about 3 min.
Data	4 gennaio 2019
Fonte	http://www.naic.edu/~pradar/press/2016AZ8.php Direct image link: http://www.naic.edu/~pradar/asteroids/animations/2016AZ8/2016AZ8.04jan18ut.gif
Autore	Arecibo Observatory/NASA/NSF

Licenza

	Questo file è nel pubblico dominio perché creato dalla NASA. La politica sul copyright della NASA afferma che «il materiale della NASA non è protetto da copyright a meno che non sia specificato altrimenti». (NASA copyright policy e JPL Image Use Policy).
	Attenzione: I loghi e gli emblemi della NASA hanno un uso ristretto per la legge USA 14 CFR 1221. Il sito web della NASA contiene un elevato numero di immagini create da agenzie sovietiche, russe o altre non statunitensi. Queste immagini non sono nel pubblico dominio. Il materiale proveniente dal telescopio spaziale Hubble potrebbe essere protetto da copyright se non proviene esplicitamente dal STScI (HubbleSite - Copyright Notice) Tutto il materiale proveniente dalla sonda SOHO è protetto da copyright e richiede il permesso per un uso commerciale e non educativo (SOHO Copyright Notice). Le immagini presenti nel sito web Astronomy Picture of the Day (APOD) potrebbero essere protette da copyright (About image permissions)

Cronologia del file

Fare clic su un gruppo data/ora per vedere il file come si presentava nel momento indicato.

	Data/Ora	Miniatura	Dimensioni	Utente	Commento
attuale	00:15, 14 feb 2020		400 × 400 (574 KB)	Nrco0e (discussione \| contributi)	User created page with UploadWizard

Impossibile sovrascrivere questo file.

Utilizzo del file

Le seguenti 2 pagine usano questo file:

Utilizzo globale del file

Anche i seguenti wiki usano questo file:

Usato nelle seguenti pagine di en.wikipedia.org:
- List of asteroid close approaches to Earth in 2019
- 2016 AZ8
Usato nelle seguenti pagine di fr.wikipedia.org:
- 2016 AZ8
Usato nelle seguenti pagine di it.wikipedia.org:
- 2016 AZ8
Usato nelle seguenti pagine di ru.wikipedia.org:
- 2016 AZ8
Usato nelle seguenti pagine di www.wikidata.org:
- Q31762994

Metadati

Questo file contiene informazioni aggiuntive, probabilmente aggiunte dalla fotocamera o dallo scanner usati per crearlo o digitalizzarlo. Se il file è stato modificato, alcuni dettagli potrebbero non corrispondere alla realtà.

Commento del file GIF

FITS (Flexible Image Transport System) format is defined in 'Astronomy and Astrophysics', volume 376, page 359; bibcode: 2001A&A...376..359H The RX start time is a reasonable approximation to the experiment mid-time. A more accurate mid-time is DATE-OBS + (EXPTIME-RTT)/2 which is typically about 3s earlier Additional -1.34775660853848e-07 s added: Range curvature correction If FREQSAMP < FFTLEN, then the transform was zero-filled SAMPPBD is the number of input samples taken per baud. ROWSPBD is the number of output image rows saved per baud. ROWSPBD and SAMPPBD may differ either because data were thrown away, or because the extra samples were used in the frequency processing. CODEPROC is the code processing method: values are short, long_orig, or long_mod. short means short-code data processed so that each Doppler fft includes data from all samples per baud; long_mod means long-code data processed in the same way; long_orig means long-code data where each sample per baud is processed separately and the separate images are then interleaved in delay.
FITS (Flexible Image Transport System) format is defined in 'Astronomy and Astrophysics', volume 376, page 359; bibcode: 2001A&A...376..359H The RX start time is a reasonable approximation to the experiment mid-time. A more accurate mid-time is DATE-OBS + (EXPTIME-RTT)/2 which is typically about 3s earlier Additional -1.27138996219855e-07 s added: Range curvature correction If FREQSAMP < FFTLEN, then the transform was zero-filled SAMPPBD is the number of input samples taken per baud. ROWSPBD is the number of output image rows saved per baud. ROWSPBD and SAMPPBD may differ either because data were thrown away, or because the extra samples were used in the frequency processing. CODEPROC is the code processing method: values are short, long_orig, or long_mod. short means short-code data processed so that each Doppler fft includes data from all samples per baud; long_mod means long-code data processed in the same way; long_orig means long-code data where each sample per baud is processed separately and the separate images are then interleaved in delay.
FITS (Flexible Image Transport System) format is defined in 'Astronomy and Astrophysics', volume 376, page 359; bibcode: 2001A&A...376..359H The RX start time is a reasonable approximation to the experiment mid-time. A more accurate mid-time is DATE-OBS + (EXPTIME-RTT)/2 which is typically about 3s earlier Additional -8.79262529451807e-09 s added: Range curvature correction If FREQSAMP < FFTLEN, then the transform was zero-filled SAMPPBD is the number of input samples taken per baud. ROWSPBD is the number of output image rows saved per baud. ROWSPBD and SAMPPBD may differ either because data were thrown away, or because the extra samples were used in the frequency processing. CODEPROC is the code processing method: values are short, long_orig, or long_mod. short means short-code data processed so that each Doppler fft includes data from all samples per baud; long_mod means long-code data processed in the same way; long_orig means long-code data where each sample per baud is processed separately and the separate images are then interleaved in delay.
FITS (Flexible Image Transport System) format is defined in 'Astronomy and Astrophysics', volume 376, page 359; bibcode: 2001A&A...376..359H The RX start time is a reasonable approximation to the experiment mid-time. A more accurate mid-time is DATE-OBS + (EXPTIME-RTT)/2 which is typically about 3s earlier Additional -1.30180019652926e-07 s added: Range curvature correction If FREQSAMP < FFTLEN, then the transform was zero-filled SAMPPBD is the number of input samples taken per baud. ROWSPBD is the number of output image rows saved per baud. ROWSPBD and SAMPPBD may differ either because data were thrown away, or because the extra samples were used in the frequency processing. CODEPROC is the code processing method: values are short, long_orig, or long_mod. short means short-code data processed so that each Doppler fft includes data from all samples per baud; long_mod means long-code data processed in the same way; long_orig means long-code data where each sample per baud is processed separately and the separate images are then interleaved in delay.
FITS (Flexible Image Transport System) format is defined in 'Astronomy and Astrophysics', volume 376, page 359; bibcode: 2001A&A...376..359H The RX start time is a reasonable approximation to the experiment mid-time. A more accurate mid-time is DATE-OBS + (EXPTIME-RTT)/2 which is typically about 3s earlier Additional -8.5345263300951e-08 s added: Range curvature correction If FREQSAMP < FFTLEN, then the transform was zero-filled SAMPPBD is the number of input samples taken per baud. ROWSPBD is the number of output image rows saved per baud. ROWSPBD and SAMPPBD may differ either because data were thrown away, or because the extra samples were used in the frequency processing. CODEPROC is the code processing method: values are short, long_orig, or long_mod. short means short-code data processed so that each Doppler fft includes data from all samples per baud; long_mod means long-code data processed in the same way; long_orig means long-code data where each sample per baud is processed separately and the separate images are then interleaved in delay.
FITS (Flexible Image Transport System) format is defined in 'Astronomy and Astrophysics', volume 376, page 359; bibcode: 2001A&A...376..359H The RX start time is a reasonable approximation to the experiment mid-time. A more accurate mid-time is DATE-OBS + (EXPTIME-RTT)/2 which is typically about 3s earlier Additional -1.27704339547563e-07 s added: Range curvature correction If FREQSAMP < FFTLEN, then the transform was zero-filled SAMPPBD is the number of input samples taken per baud. ROWSPBD is the number of output image rows saved per baud. ROWSPBD and SAMPPBD may differ either because data were thrown away, or because the extra samples were used in the frequency processing. CODEPROC is the code processing method: values are short, long_orig, or long_mod. short means short-code data processed so that each Doppler fft includes data from all samples per baud; long_mod means long-code data processed in the same way; long_orig means long-code data where each sample per baud is processed separately and the separate images are then interleaved in delay.
FITS (Flexible Image Transport System) format is defined in 'Astronomy and Astrophysics', volume 376, page 359; bibcode: 2001A&A...376..359H The RX start time is a reasonable approximation to the experiment mid-time. A more accurate mid-time is DATE-OBS + (EXPTIME-RTT)/2 which is typically about 3s earlier Additional -1.7035056032455e-08 s added: Range curvature correction If FREQSAMP < FFTLEN, then the transform was zero-filled SAMPPBD is the number of input samples taken per baud. ROWSPBD is the number of output image rows saved per baud. ROWSPBD and SAMPPBD may differ either because data were thrown away, or because the extra samples were used in the frequency processing. CODEPROC is the code processing method: values are short, long_orig, or long_mod. short means short-code data processed so that each Doppler fft includes data from all samples per baud; long_mod means long-code data processed in the same way; long_orig means long-code data where each sample per baud is processed separately and the separate images are then interleaved in delay.

File:2016AZ8 Radar.gif

Didascalie

Didascalie

Dettagli

Licenza

Cronologia del file

Utilizzo del file

Utilizzo globale del file

Metadati

Dati strutturati

Elementi ritratti in questo file

raffigura

2016 AZ8

tipo di file

image/gif

checksum

d54be8f6a743554a9feab1703a266511fc3797b4

dimensione dati

588 084 byte

durata

1,4 secondo

altezza

400 pixel

larghezza

400 pixel

Menu di navigazione

File:2016AZ8 Radar.gif

Didascalie

Didascalie

Dettagli

Licenza

Cronologia del file

Utilizzo del file

Utilizzo globale del file

Metadati

Menu di navigazione

Ricerca