File:Marshall engineers installed the injector in a subscale RS-25 engine model.jpg

Original file ‎(4,256 × 2,832 pixels, file size: 6.45 MB, MIME type: image/jpeg)

Captions

English

Add a one-line explanation of what this file represents

Summary[edit]

Description	English: Marshall Space Flight Center engineers installed a fuel injector, created by additive manufacturing (3D printing), in a subscale RS-25 engine model. During hot-fire testing, the engine and part were exposed to temperatures of nearly 6,000 degrees Fahrenheit.
Date	27 June 2013, 13:02:25
Source	http://www.nasa.gov/exploration/systems/sls/3dprinting.html
Author	NASA/MSFC

Licensing[edit]

	This file is in the public domain in the United States because it was solely created by NASA. NASA copyright policy states that "NASA material is not protected by copyright unless noted". (See Template:PD-USGov, NASA copyright policy page or JPL Image Use Policy.)
	Warnings: Use of NASA logos, insignia and emblems is restricted per U.S. law 14 CFR 1221. The NASA website hosts a large number of images from the Soviet/Russian space agency, and other non-American space agencies. These are not necessarily in the public domain. Materials based on Hubble Space Telescope data may be copyrighted if they are not explicitly produced by the STScI.[1] See also {{PD-Hubble}} and {{Cc-Hubble}}. The SOHO (ESA & NASA) joint project implies that all materials created by its probe are copyrighted and require permission for commercial non-educational use. [2] Images featured on the Astronomy Picture of the Day (APOD) web site may be copyrighted. [3] The National Space Science Data Center (NSSDC) site has been known to host copyrighted content. Its photo gallery FAQ states that all of the images in the photo gallery are in the public domain "Unless otherwise noted."

File history

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Thumbnail	Dimensions	User	Comment
current	21:31, 26 July 2013		4,256 × 2,832 (6.45 MB)	Stas1995 (talk \| contribs)	User created page with UploadWizard

You cannot overwrite this file.

File usage on Commons

There are no pages that use this file.

Metadata

This file contains additional information such as Exif metadata which may have been added by the digital camera, scanner, or software program used to create or digitize it. If the file has been modified from its original state, some details such as the timestamp may not fully reflect those of the original file. The timestamp is only as accurate as the clock in the camera, and it may be completely wrong.

Camera manufacturer	NIKON CORPORATION
Camera model	NIKON D2Xs
Exposure time	1/320 sec (0.003125)
F-number	f/9
ISO speed rating	200
Date and time of data generation	13:02, 27 June 2013
Lens focal length	58 mm
Width	4,288 px
Height	2,848 px
Bits per component	8 8 8
Pixel composition	RGB
Orientation	Normal
Number of components	3
Horizontal resolution	300 dpi
Vertical resolution	300 dpi
Software used	Adobe Photoshop CS6 (Windows)
File change date and time	11:23, 2 July 2013
Y and C positioning	Co-sited
Exposure Program	Normal program
Exif version	2.21
Date and time of digitizing	13:02, 27 June 2013
Meaning of each component	Y Cb Cr does not exist
Image compression mode	4
APEX shutter speed	8.321928
APEX aperture	6.33985
APEX exposure bias	0.66666666666667
Maximum land aperture	4.7 APEX (f/5.1)
Metering mode	Pattern
Light source	Unknown
Flash	Flash did not fire
DateTime subseconds	16
DateTimeOriginal subseconds	16
DateTimeDigitized subseconds	16
Supported Flashpix version	1
Color space	sRGB
Sensing method	One-chip color area sensor
File source	Digital still camera
Scene type	A directly photographed image
Custom image processing	Normal process
Exposure mode	Auto exposure
White balance	Auto white balance
Digital zoom ratio	1
Focal length in 35 mm film	87 mm
Scene capture type	Standard
Scene control	None
Contrast	Normal
Saturation	Normal
Sharpness	Normal
Subject distance range	Unknown
GPS tag version	2.2.0.0
Serial number of camera	6023022
Lens used	18.0-135.0 mm f/3.5-5.6
Date metadata was last modified	06:23, 2 July 2013
Unique ID of original document	9281AA53834272799A4DED46CB93630C

File:Marshall engineers installed the injector in a subscale RS-25 engine model.jpg

Captions

Captions

Summary[edit]

Licensing[edit]

File history

File usage on Commons

Metadata

Structured data

Items portrayed in this file

depicts

inception

27 June 2013

captured with

Nikon D2Xs

Navigation menu

File:Marshall engineers installed the injector in a subscale RS-25 engine model.jpg

Captions

Captions

Summary[edit]

Licensing[edit]

File history

File usage on Commons

Metadata

Navigation menu

Search