File:Online Auxiliar Water Heater Diagram.svg

De Wikimedia Commons
Salta a la navegació Salta a la cerca

Fitxer original(fitxer SVG, nominalment 732 × 874 píxels, mida del fitxer: 25 Ko)

Llegendes

Llegendes

Afegeix una explicació d'una línia del que representa aquest fitxer

Resum

[modifica]
Descripció
English: Online auxiliary water heater. 1: Municipal water feed 2: Fluid from water storage tank to external (passive) heat source; passive heat source can be the ground (soil or groundwater), sun or air; eg via heat pump, or thermodynamic solar panel 3: Fluid from heat pump, or thermodynamic solar panel to water storage tank 4: Pump, actuator, controller and other parts 5: Auxiliary water heater 6: Water storage tank 7: Hot water to domestic appliances .
Data (UTC)
Font
Autor


Això és una imatge retocada, cosa que vol dir que ha estat alterada digitalment de la seva versió original. Modificacions: Representing the circuit with an auxiliary, online, on demand heater with an external hot water source. L'original es pot veure a: Active Indirect Water Heater Diagram.svg. Modificacions fetes per Cristianrodenas.

Llicència

[modifica]
Jo, el titular dels drets d'autor d'aquest treball, el public sota la següent llicència:
w:ca:Creative Commons
reconeixement compartir igual
Aquest fitxer està subjecte a la llicència de Creative Commons Reconeixement i Compartir Igual 3.0 No adaptada.
Sou lliure de:
  • compartir – copiar, distribuir i comunicar públicament l'obra
  • adaptar – fer-ne obres derivades
Amb les condicions següents:
  • reconeixement – Heu de donar la informació adequada sobre l'autor, proporcionar un enllaç a la llicència i indicar si s'han realitzat canvis. Podeu fer-ho amb qualsevol mitjà raonable, però de cap manera no suggereixi que l'autor us dóna suport o aprova l'ús que en feu.
  • compartir igual – Si modifiqueu, transformeu, o generareu amb el material, haureu de distribuir les vostres contribucions sota una llicència similar o una de compatible com l'original

Registre original de càrregues

[modifica]

This image is a derivative work of the following images:

  • File:Active_Indirect_Water_Heater_Diagram.svg licensed with Cc-by-sa-3.0
    • 2010-04-25T20:15:16Z Slashme 732x874 (21396 Bytes) More changes as suggested by KVDP [[Category:Plumbing]] [[Category:Renewable energy]]
    • 2010-04-22T18:55:32Z Slashme 698x646 (22193 Bytes) Municipal water source from bottom
    • 2010-04-21T16:41:17Z Slashme 698x646 (21011 Bytes) Changes as requested by KVDP
    • 2010-04-18T18:01:34Z Slashme 592x407 (10006 Bytes) Hot water from top of cylinder
    • 2010-04-18T17:51:24Z Slashme 592x407 (9985 Bytes) {{Information |Description={{en|1=Active indirect water heater. 1: Municipal water feed 2: Fluid from cylinder to heat source 3: Heated fluid from heat source 4: Pump 5: Boiler 6: Hot water cylinder 7: Hot water to do

Uploaded with derivativeFX

Historial del fitxer

Cliqueu una data/hora per veure el fitxer tal com era aleshores.

Data/horaMiniaturaDimensionsUsuari/aComentari
actual23:03, 10 nov 2011Miniatura per a la versió del 23:03, 10 nov 2011732 × 874 (25 Ko)Cristianrodenas (discussió | contribucions)== {{int:filedesc}} == {{Information |Description={{en|1=Online auxiliary water heater. 1: Municipal water feed 2: Fluid from water storage tank to external (passive) heat source; passive heat source can be the ground (soil or groundwater), sun or air;

No hi ha pàgines que utilitzin aquest fitxer.

Ús global del fitxer

Utilització d'aquest fitxer en altres wikis: