File:Parabolic antennas 2.svg

From Wikimedia Commons, the free media repository
Jump to navigation Jump to search

Original file(SVG file, nominally 431 × 1,837 pixels, file size: 31 KB)

Captions

Captions

Diagram showing the most common types of parabolic antenna feeds.

Summary[edit]

Description
Русский: Основные типы зеркальных параболических антенн:
  1. Однозеркальная прямофокусная. Облучатель расположен перед параболическим зеркалом, в его фокусе. Облучатель и его крепления затеняют часть зеркала.
  2. Однозеркальная офсетная, асимметричный рефлектор, полученный вырезкой с края параболического зеркала. Облучатель расположен в точке фокуса с края антенны и не затеняет собой зеркало. Наиболее распространенный тип для спутниковых антенн небольшого размера, в частности антенн спутникового ТВ. По офсетной схеме могут быть выполнены также двухзеркальные антенны.
  3. Двухзеркальные, с облучателем, расположенным со стороны основого зеркала и дополнительным контррефлектором, по схемам Кассенгерна (гиперболический контррефлектор), Грегори (эллиптический контррефлектор) и производный от офсетной со схемой Грегори вариант схемы с кольцевым фокусом (контррефлектор в виде конуса с эллиптической образующей).
English: Diagram showing the most common types of parabolic antenna feeds.
  1. Axial or front feed. This is the most common type, with the feed antenna suspended in front of the dish on the beam axis, at the focal point, pointed back toward the dish. One drawback of this type is that the feed and its supports partially block the beam.
  2. Off-axis feed or offset-feed. The primary reflector is asymmetric, with the focus, and the feed, located to one side, outside the beam area. This avoids the problem of the feed obstructing the beam. It is used in home satellite dishes. Offset feed can also be used in multiple reflector designs such as the Cassegrain and Gregorian, below.
  3. Feed with secondary reflector. In in these designs the feed is located on or behind the dish, and its beam illuminates a small secondary reflector. Cassegrain design use hyperboloidal secondary reflector, in Gregorian design the secondary reflector has a concave ellipsoidal shape, one of possible Ring focus designs is derived from Gregorian offset and uses elliptical conical secondary reflector
Date
Source This file was derived from: Parabolic antenna types2.svg
Author Vsatinet


This is a retouched picture, which means that it has been digitally altered from its original version. Modifications: Translated to Russian, Ring focus design is added. The original can be viewed here: Parabolic antenna types2.svg. Modifications made by Vsatinet.

Licensing[edit]

I, the copyright holder of this work, hereby publish it under the following license:
w:en:Creative Commons
attribution share alike
This file is licensed under the Creative Commons Attribution-Share Alike 4.0 International license.
You are free:
  • to share – to copy, distribute and transmit the work
  • to remix – to adapt the work
Under the following conditions:
  • attribution – You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
  • share alike – If you remix, transform, or build upon the material, you must distribute your contributions under the same or compatible license as the original.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current19:07, 8 August 2020Thumbnail for version as of 19:07, 8 August 2020431 × 1,837 (31 KB)Vsatinet (talk | contribs)ring focus scheme
10:56, 20 June 2020Thumbnail for version as of 10:56, 20 June 2020438 × 1,830 (30 KB)Vsatinet (talk | contribs)вертикально для удобства размещения в статье
10:20, 20 June 2020Thumbnail for version as of 10:20, 20 June 20201,772 × 394 (30 KB)Vsatinet (talk | contribs)Uploaded own work with UploadWizard

There are no pages that use this file.

File usage on other wikis

The following other wikis use this file:

Metadata