File:Representing three-dimensional map information.jpg
![File:Representing three-dimensional map information.jpg](https://upload.wikimedia.org/wikipedia/commons/thumb/5/55/Representing_three-dimensional_map_information.jpg/449px-Representing_three-dimensional_map_information.jpg?20081009003529)
Archivo original (450 × 601 píxeles; tamaño de archivo: 40 kB; tipo MIME: image/jpeg)
Leyendas
Leyendas
![]() | Esta imagen (o todas las imágenes de este artículo o categoría) se ha subido en formato JPEG. Sin embargo, contiene información que podría almacenarse de forma más eficiente o exacta con formato PNG o SVG. Si es posible, suba una versión PNG o SVG de esta imagen sin artefactos de compresión que provenga de una fuente que no sea JPEG o a la que se le hayan eliminado los artefactos existentes. Tras hacerlo, por favor:
| ![]() |
Resumen
[editar]DescripciónRepresenting three-dimensional map information.jpg |
English: Figure 13. Approaches for representing three-dimensional map information, and for managing it in the data model.
A. Vector-based stack-unit maps depict the vertical succession of geologic units to a specified depth (here, the base of the block diagram). This mapping approach characterizes the vertical variations of physical properties in each 3-D map unit. In this example, an alluvial deposit (unit “a”) overlies glacial till (unit “t”), and the stack-unit labeled “a/t” indicates that relationship, whereas the unit “t” indicates that glacial till extends down to the specified depth. In a manner similar to that shown in figure 11, the stack-unit’s occurrence (the map unit’s outcrop), geometry (the map unit’s boundaries), and descriptors (the physical properties of the geologic units included in the stack-unit) are managed as they are for a typical 2-D geologic map. B. Raster-based stacked surfaces depict the surface of each buried geologic unit, and can accommodate data on lateral variations of physical properties. In this example from Soller and others (1999), the upper surface of each buried geologic unit was represented in raster format as an ArcInfo Grid file. The middle grid is the uppermost surface of an economically important aquifer, the Mahomet Sand, which fills a pre- and inter-glacial valley carved into the bedrock surface. Each geologic unit in raster format can be managed in the data model, in a manner not dissimilar from that shown for the stack-unit map. The Mahomet Sand is continuous in this area, and represents one occurrence of this unit in the data model. Each raster, or pixel, on the Mahomet Sand surface has a set of map coordinates that are recorded in a GIS (in the data model bin that is labeled “Pixel coordinates”, which is the raster corollary of the “Geometry” bin for vector map data). Each pixel can have a unique set of descriptive information, such as surface elevation, unit thickness, lithology, transmissivity, etc.). |
Fecha | |
Fuente | The National Geologic Map Database Project: Overview and Progress U.S. Geological Survey Open-File Report 03–471 |
Autor | David R. Soller1 and Thomas M. Berg |
Licencia
[editar]Public domainPublic domainfalsefalse |
![]() |
Esta obra se encuentra bajo el dominio público de los Estados Unidos debido a que es un trabajo hecho por un funcionario/a o empleado/a del gobierno federal de los Estados Unidos como parte de las funciones oficiales de esa persona bajo los términos del título 17, capítulo 1, sección 105 del código de los Estados Unidos. Vea Copyright.
Nota: Esto sólo se aplica a obras originales del gobierno federal y no al trabajo de cualquier persona de cualquier estado, territorio, condado, municipio, o cualquier otra subdivisión de los EE.UU. Esta plantilla tampoco se aplica a los diseños de los sellos postales publicados por el es:Servicio Postal de los Estados Unidos desde 1978. (Mira 206.02(b) of Compendium II: Copyright Office Practices). Tampoco se aplica a ciertas monedas de EE.UU., consulta los Términos de uso de la Casa de la Moneda de Estados Unidos.
|
![]() |
Esta obra ha sido identificada como libre de las restricciones conocidas en virtud del derecho de autor, incluyendo todos los derechos conexos. |
https://creativecommons.org/publicdomain/mark/1.0/PDMCreative Commons Public Domain Mark 1.0falsefalse
Historial del archivo
Haz clic sobre una fecha y hora para ver el archivo tal como apareció en ese momento.
Fecha y hora | Miniatura | Dimensiones | Usuario | Comentario | |
---|---|---|---|---|---|
actual | 00:35 9 oct 2008 | ![]() | 450 × 601 (40 kB) | Mdd (discusión | contribs.) | == Summary == {{Information |Description={{en|1= Figure 13. Approaches for representing three-dimensional map information, and for managing it in the data model. A. Vector-based stack-unit maps depict the vertical succession of geologic units to a speci |
No puedes sobrescribir este archivo.
Usos del archivo
La siguiente página usa este archivo:
Uso global del archivo
Las wikis siguientes utilizan este archivo:
- Uso en en.wikipedia.org
- Uso en es.wikipedia.org
- Uso en ja.wikipedia.org
Metadatos
Este archivo contiene información adicional, probablemente añadida por la cámara digital o el escáner usado para crearlo o digitalizarlo.
Si el archivo ha sido modificado desde su estado original, pueden haberse perdido algunos detalles.
_error | 0 |
---|