File:Watch jewel bearing and capstone.svg
Z projektu Wikimedia Commons
Skočit na navigaci
Skočit na vyhledávání
Velikost tohoto PNG náhledu tohoto SVG souboru: 640 × 420 pixelů. Jiná rozlišení: 320 × 210 pixelů | 1 024 × 672 pixelů | 1 280 × 840 pixelů | 2 560 × 1 680 pixelů.
Původní soubor (soubor SVG, nominální rozměr: 640 × 420 pixelů, velikost souboru: 28 KB)
Informace o souboru
Strukturovaná data
Popisky
Popis[editovat]
PopisWatch jewel bearing and capstone.svg |
English: Drawing of a jewel bearing and capstone in a mechanical watch. The bearing is sectioned through the axis. The jewels (red) are made of synthetic ruby. The lower jewel is called the 'hole jewel', the upper one is the 'capstone' or 'end jewel'. This type of bearing is used in watches where friction is critical, such as in the balance wheel pivots. With ordinary bearings (shown in Watch jewel bearing.svg), when the watch is vertical the shoulder of the shaft bears against the face of the hole jewel, increasing friction. This causes the watch's rate to vary with its position. In contrast, in this type, the capstone provides a low friction surface for the rounded end of the pivot to press against instead, reducing friction. The hole for the pivot is slightly convex (hourglass shaped) so that if the pivot is not exactly vertical it won't jam in the hole. The surface of the lower jewel ('bombé') is also slightly convex, holding a drop of oil (yellow) between the jewels, in contact with the pivot, by capillary attraction. The jewels are press-fitted into holes in the movement's supporting plates (grey). Information for this drawing came from Henry B. Fried (1954) Bench Practices for Watch and Clockmaker, Arlington Book Co., Virginia, USA, Book 3, Ch. 1, p.140-188 |
Datum | |
Zdroj | Vlastní dílo |
Autor | Chris Burks Chetvorno |
Svolení (Užití tohoto souboru) |
I the author release this drawing into the public domain for any use whatever. |
SVG vývoj InfoField | Tento vektorový obrázek byl vytvořen programem Inkscape, or with something else. |
Licence[editovat]
Public domainPublic domainfalsefalse |
Já, autor tohoto díla, jej tímto uvolňuji jako volné dílo, a to celosvětově. V některých zemích to není podle zákona možné; v takovém případě: Poskytuji komukoli právo užívat toto dílo za libovolným účelem, a to bezpodmínečně s výjimkou podmínek vyžadovaných zákonem. |
Historie souboru
Kliknutím na datum a čas se zobrazí tehdejší verze souboru.
Datum a čas | Náhled | Rozměry | Uživatel | Komentář | |
---|---|---|---|---|---|
současná | 14. 7. 2008, 15:59 | 640 × 420 (28 KB) | Chetvorno (diskuse | příspěvky) | == Summary == {{Information |Description={{en|Drawing of a jewel bearing and capstone in a mechanical watch. The bearing is sectioned through the axis. The jewels (red) are made of synthetic ruby. The lower jewel is calle | |
14. 7. 2008, 06:47 | 640 × 420 (28 KB) | Chetvorno (diskuse | příspěvky) | {{Information |Description={{en|Drawing of a jewel bearing and capstone for a balance wheel pivot in a Wikipedia:mechanical watch. The bearing is sectioned through the axis. |Source=Own work by uploader |Date=2008-07-13 |Author=Chris Burks [[User |
Tento soubor nemůžete přepsat.
Využití souboru
Na tento soubor neodkazuje na Commons žádná stránka.
Globální využití souboru
Tento soubor využívají následující wiki:
- Využití na bg.wikipedia.org
- Využití na cs.wikipedia.org
- Využití na de.wikipedia.org
- Využití na en.wikipedia.org
- Využití na es.wikipedia.org
- Využití na fr.wikipedia.org
- Využití na hr.wikipedia.org
- Využití na hu.wikipedia.org
- Využití na it.wikipedia.org