Category:B&O 608 amplifier
Jump to navigation
Jump to search
The B&O 608 was a hybrid (tube + transistor) mono integrated amp produced in 1962. Curiously enough, instead of using twin EL84s (the industry standard valves), B&O used a quad of ECL85 triode-pentodes.
The big display in the middle rendered 'frequency response' with a spring, which was bent up or down with bass/treble controls.
Media in category "B&O 608 amplifier"
The following 18 files are in this category, out of 18 total.
-
B&O Type 608 (Back) (5251625049).jpg 1,814 × 916; 261 KB
-
B&O Type 608 (Back2) (5251625443).jpg 1,724 × 662; 234 KB
-
B&O Type 608 (Front) (5252230274).jpg 1,310 × 484; 117 KB
-
B&O Type 608 (Front2) (5252230678).jpg 1,878 × 964; 228 KB
-
B&O Type 608 (inside) (5251626627).jpg 2,048 × 1,536; 857 KB
-
B&O Type 608 (inside2) (5251627485).jpg 2,048 × 1,536; 882 KB
-
B&O Type 608 (inside3) (5252234122).jpg 2,048 × 1,536; 871 KB
-
B&O Type 608 (underside) (5251629215).jpg 2,048 × 1,536; 1.09 MB
-
B&O Type 608 (underside2) (5252236030).jpg 2,048 × 1,536; 1.07 MB
-
B&O Type 608 (underside3) (5251630661).jpg 2,048 × 1,536; 638 KB
-
B&O Type 608 (underside4) (5252237284).jpg 2,048 × 1,536; 775 KB
-
B&O Type 608 (underside5) (5252238138).jpg 2,048 × 1,536; 932 KB
-
B&O type 608 inputs - RCA-side (5296074900).jpg 1,024 × 768; 116 KB
-
B&O type 608 riser board 1 (back) (5296074828).jpg 2,048 × 1,536; 851 KB
-
B&O type 608 riser board 1 (front) (5296074568).jpg 2,048 × 1,536; 849 KB
-
B&O type 608 riser board 2 (back) (5296074344).jpg 2,048 × 1,536; 852 KB
-
B&O type 608 riser board 2 (front) (5296074070).jpg 2,048 × 1,536; 849 KB