Category:Geometric dimensioning and tolerancing

Subcategories

This category has the following 6 subcategories, out of 6 total.

Media in category "Geometric dimensioning and tolerancing"

The following 47 files are in this category, out of 47 total.

• 
  3-2-1 Rule.png 1,600 × 795; 82 KB
  
• 
  321regel.png 1,600 × 795; 230 KB
  
• 
  Acotación-Model.png 662 × 354; 8 KB
  
• 
  CotasRepetitivas.png 682 × 227; 6 KB
  
• 
  Cotation gps alignement fleches.svg 608 × 418; 49 KB
  
• 
  Cotation gps exemple alesage association.svg 557 × 248; 23 KB
  
• 
  Cotation gps exemple alesage partition.svg 474 × 482; 43 KB
  
• 
  Cotation GPS independence.svg 384 × 156; 24 KB
  
• 
  Cotation gps position percage cotation traditionnelle.svg 1,411 × 1,184; 34 KB
  
• 
  Diagram of simple slope correction.svg 563 × 504; 34 KB
  
• 
  Form-& Lagetoleranz Zeichnungsangabe.PNG 846 × 360; 31 KB
  
• 
  GD&T Angularity.svg 250 × 250; 170 bytes
  
• 
  GD&T Circular runout.svg 512 × 512; 603 bytes
  
• 
  GD&T Circularity.svg 512 × 512; 551 bytes
  
• 
  GD&T Concentricity.svg 512 × 512; 624 bytes
  
• 
  Gd&t continuousfeature.svg 94 × 64; 807 bytes
  
• 
  GD&T Cylindricity.svg 512 × 512; 681 bytes
  
• 
  GD&T Flatness.svg 512 × 512; 521 bytes
  
• 
  Gd&t freestate.svg 64 × 64; 381 bytes
  
• 
  Gd&t leastmaterialcondition.svg 64 × 64; 381 bytes
  
• 
  Gd&t maximummaterialcondition.svg 64 × 64; 381 bytes
  
• 
  GD&T Parallelism.svg 512 × 512; 587 bytes
  
• 
  GD&T Perpendicularity.svg 512 × 512; 596 bytes
  
• 
  GD&T Position.svg 512 × 512; 744 bytes
  
• 
  GD&T Profileofaline.svg 512 × 512; 552 bytes
  
• 
  GD&T Profileofasurface.svg 512 × 512; 561 bytes
  
• 
  Gd&t projectedtolerancezone.svg 64 × 64; 381 bytes
  
• 
  Gd&t regardlessoffeaturesize.svg 64 × 64; 381 bytes
  
• 
  Gd&t statisticaltolerance.svg 94 × 64; 832 bytes
  
• 
  GD&T Straightness.svg 512 × 512; 522 bytes
  
• 
  GD&T Symmetry.svg 512 × 512; 698 bytes
  
• 
  Gd&t tangentplane.svg 64 × 64; 381 bytes
  
• 
  GD&T Totalrunout.svg 512 × 512; 959 bytes
  
• 
  Gd&t unilateral.svg 64 × 64; 381 bytes
  
• 
  GD&T.PNG 659 × 403; 18 KB
  
• 
  Geometric dimenioning and tolerancing-hole.png 304 × 55; 4 KB
  
• 
  Geometric dimenioning and tolerancing-hole.svg 1,029 × 630; 24 KB
  
• 
  Langloch.png 320 × 142; 3 KB
  
• 
  Mehrfachbezug.PNG 242 × 88; 7 KB
  
• 
  Schneckenwelle.png 1,350 × 955; 65 KB
  
• 
  Surface finish specification.svg 594 × 694; 27 KB
  
• 
  Surface finish specification2.svg 959 × 246; 47 KB
  
• 
  Technical Drawing Hole 01.svg 512 × 666; 4 KB
  
• 
  Technical Drawing Hole 02.png 326 × 447; 5 KB
  
• 
  Technical Drawing Hole 03.png 271 × 296; 2 KB
  
• 
  Technical Drawing Hole 04.png 319 × 453; 6 KB
  
• 
  Značka drsnosti - popis.png 553 × 413; 14 KB