Category:MakerBot

Subcategories

This category has only the following subcategory.

Media in category "MakerBot"

The following 134 files are in this category, out of 134 total.

• 
  Automated Build Platform for Thing-O-Matic.jpg 1,062 × 657; 102 KB
  
• 
  Battery Box Pre-Print View..png 578 × 423; 76 KB
  
• 
  Blob printing failure.JPG 640 × 480; 134 KB
  
• 
  Central Cross Patch.jpg 3,264 × 2,448; 3 MB
  
• 
  CleanGears.JPG 640 × 480; 135 KB
  
• 
  ClickProblem1.JPG 640 × 480; 138 KB
  
• 
  ClickProblem2.JPG 640 × 480; 142 KB
  
• 
  Downloading an STL File Procedure Step 1.jpg 603 × 482; 18 KB
  
• 
  Downloading an STL File Procedure Step 3.jpg 508 × 277; 38 KB
  
• 
  Downloading an STL File Procedure Step 7.jpg 593 × 250; 31 KB
  
• 
  Duct bracket in place (inside).JPG 3,648 × 2,736; 3.81 MB
  
• 
  Duct bracket in place (outside).JPG 3,648 × 2,736; 3.63 MB
  
• 
  Fast Forward (30595852134).jpg 4,896 × 3,264; 10.51 MB
  
• 
  Feedthrew.JPG 558 × 1,053; 232 KB
  
• 
  File selection.png 1,600 × 858; 869 KB
  
• 
  FinishedBracelet.JPG 640 × 480; 130 KB
  
• 
  FredsBoxBase.png 641 × 561; 358 KB
  
• 
  FredsErrors3.png 457 × 373; 60 KB
  
• 
  HeatSinkDoNotRemove.JPG 640 × 480; 146 KB
  
• 
  In love, technologically speaking. 3d printers are THE gadget among gadgets. (8543087868).jpg 2,592 × 1,944; 1.4 MB
  
• 
  Kent State Mini Maker Faire (14336004161).jpg 3,264 × 2,448; 1.8 MB
  
• 
  Kent State Mini Maker Faire (14336215492).jpg 4,928 × 3,264; 6.66 MB
  
• 
  MakerBot Digitizer.jpg 4,160 × 2,340; 2.31 MB
  
• 
  MakerBot fan duct damage.JPG 3,648 × 2,736; 3.94 MB
  
• 
  MakerBot Founders and Final Prototypes.jpg 3,690 × 2,195; 2.66 MB
  
• 
  Makerbot Heated Build Platform.jpg 1,495 × 1,140; 147 KB
  
• 
  MakerBot in Lille - 1.jpg 1,728 × 2,304; 691 KB
  
• 
  MakerBot in Lille - 2.jpg 1,728 × 2,304; 666 KB
  
• 
  MakerBot in Lille - 3.jpg 2,304 × 1,728; 731 KB
  
• 
  MakerBot in Lille - 4.jpg 1,728 × 2,304; 648 KB
  
• 
  MakerBot in Lille - 5.jpg 2,304 × 1,728; 656 KB
  
• 
  MakerBot logo.svg 617 × 768; 8 KB
  
• 
  Makerbot pla blob.JPG 640 × 480; 133 KB
  
• 
  Makerbot print area.jpg 3,000 × 4,000; 4.57 MB
  
• 
  Makerbot printing problems.jpg 3,264 × 1,836; 1.16 MB
  
• 
  MakerBot Replicator (3D Printer), apexart, 2012.jpg 612 × 612; 68 KB
  
• 
  MakerBot Replicator 2 Desktop 3D Printer.jpg 4,160 × 2,340; 2.49 MB
  
• 
  MakerBot Replicator 5th Gen.JPG 1,936 × 2,592; 1.72 MB
  
• 
  MakerBot Replicator Desktop 3D Printer at Expert, Mariehamn, Xmas 2014 (2014-12-19 by Hannu Makarainen).jpg 3,264 × 2,448; 1.05 MB
  
• 
  Makerbot Replicator dog mid-job.png 1,536 × 2,048; 1.95 MB
  
• 
  MakerBot Replicator2.jpg 800 × 638; 61 KB
  
• 
  MakerBot Spikey Gear and Raft in MakerBot Cupcake CNC.jpg 375 × 500; 72 KB
  
• 
  Makerbot Store, Manhattan (NY, USA) (8763057041).jpg 3,872 × 2,592; 3.7 MB
  
• 
  Makerbot Store, Manhattan (NY, USA) (8763057847).jpg 3,872 × 2,592; 3.18 MB
  
• 
  Makerbot Store, Manhattan (NY, USA) (8763059397).jpg 3,872 × 2,592; 3.73 MB
  
• 
  Makerbot Store, Manhattan (NY, USA) (8763062893).jpg 3,872 × 2,592; 3.78 MB
  
• 
  Makerbot Store, Manhattan (NY, USA) (8763082533).jpg 3,872 × 2,592; 3.52 MB
  
• 
  Makerbot Store, Manhattan (NY, USA) (8764957828).jpg 3,872 × 2,592; 3.54 MB
  
• 
  Makerbot Store, Manhattan (NY, USA) (8764959226).jpg 3,872 × 2,592; 2.73 MB
  
• 
  Makerbot Store, Manhattan (NY, USA) (8764959982).jpg 3,872 × 2,592; 3.85 MB
  
• 
  Makerbot Store, Manhattan (NY, USA) (8764961400).jpg 3,872 × 2,592; 3.47 MB
  
• 
  Makerbot Store, Manhattan (NY, USA) (8764962778).jpg 3,872 × 2,592; 3.2 MB
  
• 
  Makerbot Store, Manhattan (NY, USA) (8764963488).jpg 3,872 × 2,592; 3.35 MB
  
• 
  Makerbot Store, Manhattan (NY, USA) (8764964022).jpg 3,872 × 2,592; 3.46 MB
  
• 
  Makerbot Thing-O-Matic Assembled Printing Blue Rabbit.jpg 2,753 × 2,963; 2.77 MB
  
• 
  MakerBot ThingOMatic Bre Pettis.jpg 682 × 1,024; 371 KB
  
• MakerBot-printing-cylinder.ogv 7.3 s, 1,280 × 720; 3.88 MB
  
• 
  Makerbot.jpg 3,000 × 4,000; 4.86 MB
  
• 
  MakerBotCleanedNozzle.JPG 3,456 × 2,304; 3.21 MB
  
• 
  MakerBotFailure1-212hrs.JPG 3,456 × 2,304; 3.37 MB
  
• 
  MakerBotFailure2-212hrs.JPG 3,456 × 2,304; 3.16 MB
  
• 
  MakerBotFanHeatSink.JPG 3,456 × 2,304; 3.3 MB
  
• 
  MakerbotHeadPieces.png 2,214 × 1,071; 3.06 MB
  
• 
  MakerbotHeadRemoved.png 3,456 × 2,304; 9.78 MB
  
• 
  MakerbotHeater.JPG 3,456 × 2,304; 3.25 MB
  
• 
  MakerBotHeaterInstalled.png 1,917 × 1,428; 3.51 MB
  
• 
  MakerBotNozzelCleaned.png 1,488 × 963; 1.81 MB
  
• 
  MakerBotStepperMotor.png 2,133 × 1,587; 4.14 MB
  
• 
  MakerbotTest.jpg 399 × 599; 62 KB
  
• 
  Makerware preview 2.png 673 × 665; 186 KB
  
• 
  Makerware preview.png 662 × 658; 244 KB
  
• 
  Notch for duct bracket (bottom).JPG 3,648 × 2,736; 4.1 MB
  
• 
  NozzleBack.JPG 585 × 564; 150 KB
  
• 
  NozzleFront.JPG 741 × 633; 197 KB
  
• 
  Object manipulation.png 1,600 × 856; 1.11 MB
  
• 
  One kinect - two mirrors = five kinects - Flickr - Kyle McDonald.jpg 3,456 × 5,184; 2.72 MB
  
• 
  Open makerware.png 1,600 × 854; 1.11 MB
  
• 
  Outside the box 110616-A-ZR356-004.jpg 2,848 × 4,288; 5.2 MB
  
• 
  Print head close up.JPG 640 × 480; 141 KB
  
• 
  Print head.JPG 640 × 480; 140 KB
  
• 
  Printing Procedure Step 1.jpg 538 × 194; 35 KB
  
• 
  Printing Procedure Step 2.jpg 626 × 336; 57 KB
  
• 
  Printing Procedure Step 3.1.jpg 561 × 290; 52 KB
  
• 
  Printing Procedure Step 4.jpg 581 × 303; 53 KB
  
• 
  Printing Procedure Step 5.jpg 538 × 207; 36 KB
  
• 
  Printing Procedure Step 6.2.jpg 538 × 245; 36 KB
  
• 
  Quadcopter MakerBot finished.jpg 3,264 × 2,448; 1.63 MB
  
• 
  Quadcopter MakerBot printing.jpg 3,264 × 2,448; 1.66 MB
  
• 
  Redesigned Battery Box.png 577 × 489; 216 KB
  
• 
  Replicator 2 active cooling fan duct (bottom).JPG 3,648 × 2,736; 3.81 MB
  
• 
  Replicator 2 active cooling fan duct (left end).JPG 3,648 × 2,736; 3.62 MB
  
• 
  Replicator 2 active cooling fan duct (top).JPG 3,648 × 2,736; 3.62 MB
  
• 
  Replicator 2 active cooling fan duct bracket.JPG 3,648 × 2,736; 4.04 MB
  
• 
  Replicator 2 active cooling fan removed.JPG 3,648 × 2,736; 3.94 MB
  
• 
  Replicator 2 cable tie left side.JPG 3,648 × 2,736; 3.67 MB
  
• 
  Replicator 2 cable tie right side.JPG 3,648 × 2,736; 3.75 MB
  
• 
  Replicator 2 cable tie top.JPG 3,648 × 2,736; 3.75 MB
  
• 
  Replicator 2 cable ties cratching problem.JPG 3,648 × 2,736; 3.89 MB
  
• 
  Replicator 2 cooling fan duct bracket (hook).JPG 3,648 × 2,736; 3.95 MB
  
• 
  Replicator 2 duct bracket notch (top).JPG 3,648 × 2,736; 4.05 MB
  
• 
  Replicator 2 duct bracket tabs.JPG 3,648 × 2,736; 3.8 MB
  
• 
  Replicator 2 duct halves (inside).JPG 3,648 × 2,736; 4.08 MB
  
• 
  Replicator 2 fan duct halves (outside).JPG 3,648 × 2,736; 3.67 MB
  
• 
  Replicator 2 fan duct installed.JPG 3,648 × 2,736; 3.69 MB
  
• 
  Replicator 2 fan with duct.JPG 3,648 × 2,736; 3.94 MB
  
• 
  Saving the file.png 870 × 512; 173 KB
  
• 
  ScalesMakerWare.png 320 × 237; 82 KB
  
• 
  ScrewsAndStandoffs.JPG 3,456 × 2,304; 3.33 MB
  
• 
  SeeBracelet.JPG 640 × 480; 136 KB
  
• 
  Setup Procedure Step 1.jpg 2,048 × 1,536; 404 KB
  
• 
  Setup Procedure Step 10.jpg 2,048 × 1,536; 615 KB
  
• 
  Setup Procedure Step 2.jpg 819 × 512; 95 KB
  
• 
  SetUp Procedure Step 3.jpg 819 × 484; 77 KB
  
• 
  Setup Procedure Step 7.1.jpg 602 × 167; 28 KB
  
• 
  Setup Procedure Step 7.2.jpg 615 × 160; 31 KB
  
• 
  Setup Procedure Step 8.jpg 583 × 184; 33 KB
  
• 
  Setup Procedure Step 9.jpg 2,048 × 1,536; 571 KB
  
• 
  So it begins... (15881244500).jpg 5,616 × 3,744; 15.5 MB
  
• 
  Strut on MakerBot.jpg 3,264 × 2,448; 2.93 MB
  
• 
  That holiday party (31675486226).jpg 4,896 × 3,264; 18.84 MB
  
• 
  Transparent Makerbot Thing-O-Matic.jpg 800 × 600; 290 KB
  
• 
  Uploading an STL File onto Replicator G Procedure Step 1.jpg 508 × 258; 31 KB
  
• 
  Uploading an STL File onto Replicator G Procedure Step 3.jpg 665 × 532; 77 KB
  
• 
  Uploading an STL File onto Replicator G Procedure Step 4.jpg 642 × 514; 81 KB
  
• 
  Uploading an STL File onto Replicator G Procedure Step 5.jpg 651 × 521; 84 KB
  
• 
  Uploading an STL File onto Replicator G Procedure Step 6.jpg 287 × 104; 13 KB
  
• 
  Uploading an STL File onto Replicator G Procedure Step 7.jpg 274 × 282; 33 KB
  
• 
  Uploading an STL File onto Replicator G Procedure Step 8.jpg 294 × 296; 35 KB
  
• 
  Uploading an STL File onto Replicator G Procedure Step 9.1.jpg 298 × 297; 36 KB
  
• 
  Uploading an STL File onto Replicator G Procedure Step 9.2.jpg 646 × 517; 86 KB
  
• 
  WireSpooler.JPG 640 × 480; 133 KB
  
• 
  Witten Zentralbibliothek Makerbot Replicator.jpg 4,000 × 3,000; 2.04 MB
  
• 
  Witten Zentralbibliothek Makerspace.jpg 4,000 × 3,000; 2.3 MB
  
• 
  विज्ञान आश्रम रांगोळी मशीन.jpg 4,096 × 2,304; 3.52 MB