Category:Tandem Rolling Mills

Media in category "Tandem Rolling Mills"

The following 35 files are in this category, out of 35 total.

• 
  6 Hi mill.jpg 700 × 430; 59 KB
  
• 
  Amplified Area of Graph around Operation Point of Rolling Mill.jpg 1,091 × 533; 50 KB
  
• 
  Bearing speed effect.jpg 1,023 × 580; 175 KB
  
• 
  Block Diagram for the Thickness Control of a 2 Stand Rolling Mill.jpg 440 × 600; 91 KB
  
• 
  Compression Curve of a Standard Tin-plate Grade.jpg 756 × 531; 57 KB
  
• 
  Computer levels.jpg 640 × 700; 82 KB
  
• 
  Diagram showing Rolling Mill Forces & Tensions.jpg 532 × 575; 28 KB
  
• 
  Examples of collapsed coils and solutions.jpg 720 × 720; 46 KB
  
• 
  Graph of Rolling Mill Spring Curve showing Datum Point.jpg 821 × 513; 47 KB
  
• 
  Graph showing Rolling Mill Force Change for a Screw-down Movement.jpg 966 × 470; 98 KB
  
• 
  Graphical Solution for the Rolling of a Thin Strip.jpg 763 × 500; 75 KB
  
• 
  Hydraulic Piston driving BU Roll correction.gif 440 × 330; 1.16 MB
  
• 
  Ingot.jpg 662 × 566; 70 KB
  
• 
  Looping Tower.jpg 400 × 600; 48 KB
  
• 
  Measured Bearing Speed Effect data and curve.jpg 615 × 612; 52 KB
  
• 
  Mill stand end view.jpg 440 × 380; 41 KB
  
• 
  Mill stand showing load cells positions.jpg 380 × 380; 34 KB
  
• 
  Photo of 5 Stand Temper Mill.jpg 3,263 × 1,117; 1.12 MB
  
• 
  Photo of Chart Recording made during the Rolling of the Head-end of a Double Reduced Coil.jpg 1,012 × 580; 175 KB
  
• 
  Photo of Chart Recording made during the Rolling of the Head-end of an SR Coil.jpg 1,024 × 581; 189 KB
  
• 
  Photo of Chart Recording taken at the beginning of Rolling a Coil showing Tension Components.jpg 1,018 × 580; 171 KB
  
• 
  Photo of excel generated graph of Steel Compression Curve.jpg 700 × 513; 55 KB
  
• 
  Picture showing the Force Distribution through the Roll Bite during Rolling.jpg 600 × 750; 56 KB
  
• 
  Position of WR Bending Cylinders.jpg 270 × 350; 24 KB
  
• 
  Reduction (definition).jpg 600 × 760; 38 KB
  
• 
  Rolling compressed.gif 800 × 471; 4.44 MB
  
• 
  Sensitivities.jpg 966 × 470; 98 KB
  
• 
  Sketch of Bridle Roll sets.jpg 920 × 1,070; 148 KB
  
• 
  Sketch of Roll Stack showing the Oil Films in the Bearings of the Back-up Rolls.jpg 521 × 690; 47 KB
  
• 
  Sketch of Speed-to-Tension Control Block Diagram.jpg 481 × 232; 29 KB
  
• 
  Sketch showing payoff reel (un-coiler), entry bridle, 2 stands, exit bridle and coiler (tension reel).jpg 926 × 358; 63 KB
  
• 
  Sketch shows Thicknesses and Lengths associated with an Elongation (definition).jpg 595 × 220; 25 KB
  
• 
  Temper Mill Control DR.jpg 1,520 × 985; 196 KB
  
• 
  Temper mill control SR.jpg 1,520 × 985; 191 KB
  
• 
  Threading of temper mill.gif 926 × 358; 24 KB