File:Amplitude & phase vs frequency for 3-term boxcar filter.svg
来自Wikimedia Commons
跳转到导航
跳转到搜索
![File:Amplitude & phase vs frequency for 3-term boxcar filter.svg](https://upload.wikimedia.org/wikipedia/commons/thumb/9/9a/Amplitude_%26_phase_vs_frequency_for_3-term_boxcar_filter.svg/435px-Amplitude_%26_phase_vs_frequency_for_3-term_boxcar_filter.svg.png?20201001130441)
此SVG文件的PNG预览的大小:435 × 400像素。 其他分辨率:261 × 240像素 | 522 × 480像素 | 835 × 768像素 | 1,114 × 1,024像素 | 2,227 × 2,048像素。
原始文件 (SVG文件,尺寸为435 × 400像素,文件大小:20 KB)
文件信息
结构化数据
说明
说明
添加一行文字以描述该文件所表现的内容
摘要
[编辑]描述Amplitude & phase vs frequency for 3-term boxcar filter.svg |
English: These graphs depict the same transfer function as File:Frequency response of 3-term boxcar filter.gif. But here, the amplitude is a signed quantity. And where it is negative, the quantity π has been added to the phase plot (before computing the principal value). The purpose is to illustrate the linear-phase property of the FIR filter.
Русский: Амлитудно-частотная и фазовая характеристики фильтра с конечной импульсной характеристикой скользящего среднего |
|||
日期 | ||||
来源 | 自己的作品 | |||
作者 |
original: Bob K vector version: Krishnavedala |
|||
授权 (二次使用本文件) |
|
|||
其他版本 |
|
|||
SVG开发 InfoField | ||||
Python source InfoField | click to expand
This script is a translation of the original Octave script into Python, for the purpose of generating an SVG file to replace the GIF version. import scipy
from scipy import signal
import numpy as np
from matplotlib import pyplot as plt
N = 256
h = np.array([1., 1., 1.]) / 3
H = scipy.fftpack.shift(scipy.fft(h, n=N), np.pi)
w = np.linspace(-N/2, N/2-1, num=N) * 2 * np.pi / N
amplitude = abs(H)
L = int(np.floor(N/6))
negate1 = np.array(range(L)) + 1
negate2 = N - np.array(range(L)) - 1
amplitude[negate1] = -amplitude[negate1]
amplitude[negate2] = -amplitude[negate2]
H[negate1] = -H[negate1]
H[negate2] = -H[negate2]
fig = plt.figure(figsize=[5,5])
plt.subplot(211)
plt.plot(w, amplitude, 'blue')
plt.grid(True)
plt.ylabel('Amplitude')
plt.xlim([-np.pi,np.pi])
plt.xticks([-np.pi, -2*np.pi/3,0,2*np.pi/3,np.pi], [])
plt.subplot(212)
plt.plot(w, np.angle(H), 'blue')
plt.grid(True)
plt.ylabel('Phase (radians)')
plt.xlabel('$\\longleftarrow$ Frequency ($\\omega$) (radians/sample) $\\longrightarrow$')
plt.xticks([-np.pi, -2*np.pi/3,0,2*np.pi/3,np.pi], ['-$\pi$','-2$\pi$/3','0','2$\pi$/3','$\pi$'])
plt.xlim([-np.pi,np.pi])
plt.yticks([-np.pi, -2,-1,0,1,2,np.pi], ['-$\pi$','-2','-1','0','1','2','$\pi$'])
plt.ylim([-np.pi,np.pi])
plt.subplots_adjust(hspace=0.1)
plt.savefig('Amplidue & phase vs frequency response of 3-term boxcar filter.svg', bbox_inches='tight', transparent=True)
|
|||
Octave/gnuplot source InfoField | click to expand
This script was derived from the original in order to address some GNUplot bugs: a missing title and two missing axis labels. And to add an Octave print function, which creates an SVG file. Alternatively, the gnuplot screen image has an export function that produces an SVG file, but the π characters aren't as professional-looking. I think the resultant quality produced by this script is now better than the file produced by the Python script.
graphics_toolkit gnuplot
clear all; close all; clc
hfig = figure("position",[100 100 509 509]);
x1 = .12; % left margin for name of Y-variable
x2 = .02; % right margin
y1 = .10; % bottom margin for ticks
y2 = .08; % top margin for title
dy = .08; % vertical space between rows
width = 1-x1-x2;
height= (1-y1-y2-dy)/2; % space allocated for each of 2 rows
x_origin = x1;
y_origin = 1; % start at top of graph area
%=======================================================
N= 256;
h = [1 1 1]/3; % impulse response
H = fftshift(fft(h,N)); % samples of DTFT
abscissa = (-N/2:N/2-1)*2*pi/N; % normalized frequency
% Specify the bins that are to show a negative amplitude
L = floor(N/6);
negate = [1+(0:L) N-(0:L-1)];
amplitude = abs(H);
amplitude(negate) = -amplitude(negate);
H(negate) = -H(negate); % compensate the phase of those bins
phase = angle(H);
%=======================================================
y_origin = y_origin -y2 -height; % position of top row
subplot("position",[x_origin y_origin width height])
plot(abscissa, amplitude, "linewidth", 2);
% Default xaxislocation is "bottom", which is where we want the tick labels.
% set(gca, "xaxislocation", "origin")
hold on
plot(abscissa, zeros(1,N), "color", "black") % draw x-axis
xlim([-pi pi])
ylim([-.4 1.2])
set(gca, "XTick", [-pi -2*pi/3 0 2*pi/3 pi])
set(gca, "YTick", [-.2 0 .2 .4 .6 .8 1])
grid("on")
ylabel("Amplitude")
% set(gca, "ticklabelinterpreter", "tex") % tex is the default
set(gca, "XTickLabel", ['-\pi'; '-2\pi/3'; '0'; '2\pi/3'; '\pi';])
set(gca, "YTickLabel", ['-.2'; '0'; '.2'; '.4'; '.6'; '.8'; '1';])
title("Frequency response of 3-term boxcar filter", "fontsize", 12)
%=======================================================
y_origin = y_origin -dy -height;
subplot("position",[x_origin y_origin width height])
plot(abscissa, phase, "linewidth", 2);
xlim([-pi pi])
ylim([-pi pi])
set(gca, "XTick", [-pi -2*pi/3 0 2*pi/3 pi])
set(gca, "YTick", [-pi -2 -1 0 1 2 pi])
grid("on")
xlabel('\leftarrow Frequency (\omega) (radians/sample) \rightarrow')
ylabel("Phase (radians)")
% set(gca, "ticklabelinterpreter", "tex") % tex is the default
set(gca, "XTickLabel", ['-\pi'; '-2\pi/3'; '0'; '2\pi/3'; '\pi';])
set(gca, "YTickLabel", ['-\pi'; '-2'; '-1'; '0'; '1'; '2'; '\pi';])
% The print function results in nicer-looking "pi" symbols
% than the export function on the GNUPlot figure toolbar.
print(hfig,"-dsvg", "-S509,509","-color", ...
'C:\Users\BobK\Amplitude & phase vs frequency for a 3-term boxcar filter.svg')
|
文件历史
点击某个日期/时间查看对应时刻的文件。
日期/时间 | 缩略图 | 大小 | 用户 | 备注 | |
---|---|---|---|---|---|
当前 | 2020年10月1日 (四) 13:04 | ![]() | 435 × 400(20 KB) | Krishnavedala(留言 | 贡献) | Text-to-graph aspect ratio renders poorly in thumbnails with text unreadable. |
2019年7月3日 (三) 01:25 | ![]() | 512 × 512(42 KB) | Bob K(留言 | 贡献) | change graph "linewidth" to 2 | |
2019年7月2日 (二) 13:03 | ![]() | 512 × 512(42 KB) | Bob K(留言 | 贡献) | Enlarge image. Add title. Improve rendering of "pi" symbols. | |
2017年8月22日 (二) 16:23 | ![]() | 435 × 400(20 KB) | Krishnavedala(留言 | 贡献) | corrections on phase plot | |
2017年8月22日 (二) 16:11 | ![]() | 435 × 400(20 KB) | Krishnavedala(留言 | 贡献) | new version using Matplotlib | |
2017年8月21日 (一) 15:26 | ![]() | 512 × 384(42 KB) | Krishnavedala(留言 | 贡献) | thicker lines and uses unicode text | |
2017年8月16日 (三) 22:01 | ![]() | 576 × 432(43 KB) | Krishnavedala(留言 | 贡献) | Use Unicode for Greek symbols | |
2017年8月16日 (三) 21:58 | ![]() | 576 × 432(43 KB) | Krishnavedala(留言 | 贡献) | Unicode symbols corrected | |
2017年8月16日 (三) 21:52 | ![]() | 576 × 432(43 KB) | Krishnavedala(留言 | 贡献) | regenerate using "gnuplot" backend | |
2017年8月16日 (三) 21:31 | ![]() | 576 × 431(28 KB) | Krishnavedala(留言 | 贡献) | User created page with UploadWizard |
您不可以覆盖此文件。
文件用途
以下3个页面使用本文件:
全域文件用途
以下其他wiki使用此文件:
- en.wikipedia.org上的用途
- zh.wikipedia.org上的用途
元数据
此文件含有额外信息,这些信息可能是创建或数字化该文件时使用的数码相机或扫描仪所添加的。如果文件已从其原始状态修改,某些详细信息可能无法完全反映修改后的文件。
宽度 | 348pt |
---|---|
高度 | 320pt |