File:DIP switches and description on back of QSC PLX2402 professional PA Power Amplifier.jpg
DIP_switches_and_description_on_back_of_QSC_PLX2402_professional_PA_Power_Amplifier.jpg (252 × 337 pixels, file size: 29 KB, MIME type: image/jpeg)
Captions
Summary[edit]
DescriptionDIP switches and description on back of QSC PLX2402 professional PA Power Amplifier.jpg |
Deutsch: Anschlüsse und DIP-Schalter auf der Rückseite eines professionellen PA-Endverstärkers QSC PLX2402. Von links nach rechts: Zwei (symmetrische) XLR-Buchsen zum Anschluss der Eingangssignale für zwei Audio-Kanäle (Stereo), zwei 6,35-mm-Klinkenbuchsen für denselben Zweck (alternativer Eingang), eine Reihe mit 10 DIP-Schaltern (blau), symmetrisch für beide Kanäle.
English: Connectors and DIP switches on the backside of a QSC PLX2402 professional PA Power Amplifier. From left to right: Two (symmetrical) XLR input connectors for two input channels (stereo), two audio jack connectors (mono, symmetrical) 6.35 millimetres (1⁄4 inch) for the same purpose, and 10 DIP switches (blue) for both channels symmetrically. |
|||
Date | ||||
Source | Own work | |||
Author | Pittigrilli | |||
Other versions |
|
Licensing[edit]
- You are free:
- to share – to copy, distribute and transmit the work
- to remix – to adapt the work
- Under the following conditions:
- attribution – You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
- share alike – If you remix, transform, or build upon the material, you must distribute your contributions under the same or compatible license as the original.
Annotations InfoField | This image is annotated: View the annotations at Commons |
Two (symmetrical) XLR input connectors for two input channels (stereo)
Zwei (symmetrische) XLR-Buchsen zum Anschluss der Eingangssignale für zwei Audio-Kanäle (Stereo)
Audio jack connector for signal input of channel 1 (CH 1)
6,35-mm-Klinkenbuchse für den Anschluss des Eingangssignals für Kanal 1 (CH 1)
Audio jack connector for signal input of channel 2 (CH 2)
6,35-mm-Klinkenbuchse für den Anschluss des Eingangssignals für Kanal 2 (CH 2)
DIP Switches ("MODE SWITCHES") for configuring operation parameters of the power amplifier which are seldomly changed, like bridge mode, clip limiter, etc.
DIP-Schalter ("MODE SWITCHES") für die Einstellung von Betriebsparametern des Endverstärkers, die nur selten verändert werden, wie Mono-Betrieb als Brückenverstärker, Clipping-Begrenzer, etc.
Loudspeaker terminals of the quasi-standardized type Neutrik Speakon
Lautsprecheranschlüsse nach dem Quasistandard Neutrik Speakon
Louspeaker terminals as screw terminals, red and black for one channel each - alternatively to the Neutrik Speakon connectors more left
Lautsprecheranschlüsse mit Schraubklemmen, jeweils rot und schwarz für einen Kanal - als Alternative zu den Neutrik-Speakon-Anschlüssen weiter links
cooling fan
Lüfter
Loudspeaker pictograms (symbols) indicating how to attach the wires for normal stereo mode or for mono operation (bridge mode)
Lautsprecher-Piktogramme zur Anzeige der korrekten Verkabelung für normalen Stereo-Betrieb oder für den Betrieb als Monoendstufe (Brückenverstärker)
File history
Click on a date/time to view the file as it appeared at that time.
Date/Time | Thumbnail | Dimensions | User | Comment | |
---|---|---|---|---|---|
current | 02:38, 24 January 2023 | 252 × 337 (29 KB) | Pittigrilli (talk | contribs) | File:Connectors of a QSC PLX2402 professional PA Power Amplifier.jpg cropped 71 % horizontally, 3 % vertically using CropTool with precise mode. |
You cannot overwrite this file.
File usage on Commons
The following page uses this file: