File:REACT Demonstration (KSC-20220728-PH-FMX02 0074).jpeg

Original file ‎(6,720 × 4,480 pixels, file size: 20.11 MB, MIME type: image/jpeg)

Captions

English

Add a one-line explanation of what this file represents

Summary[edit]

Description

English: Materials engineer Thomas Lipscomb tests a 3D printer on July 28, 2022, at Swamp Works at NASA’s Kennedy Space Center in Florida, as part of the Relevant Environment Additive Construction Technology (REACT) project. Among the key objectives of the project is developing an architectural and structural design for a shelter that provides protection to habitable assets on the lunar surface. Testing REACT derives from NASA’s 2020 Announcement of Collaboration Opportunity with AI SpaceFactory – an architectural and construction technology company and winner of NASA’s 3D Printed Habitat Challenge.

Date

Taken on 28 July 2022

Source

This image or video was catalogued by Kennedy Space Center of the United States National Aeronautics and Space Administration (NASA) under Photo ID: KSC-20220728-PH-FMX02_0074.

This tag does not indicate the copyright status of the attached work. A normal copyright tag is still required. See Commons:Licensing.

Other languages:

العربية ∙ беларуская (тарашкевіца) ∙ български ∙ català ∙ čeština ∙ dansk ∙ Deutsch ∙ English ∙ español ∙ فارسی ∙ français ∙ galego ∙ magyar ∙ հայերեն ∙ Bahasa Indonesia ∙ italiano ∙ 日本語 ∙ македонски ∙ മലയാളം ∙ Nederlands ∙ polski ∙ português ∙ русский ∙ sicilianu ∙ slovenščina ∙ Türkçe ∙ українська ∙ 简体中文 ∙ 繁體中文 ∙ +/−

Author

NASA Kennedy Space Center / NASA/Frank Michaux

Frank Michaux
Description	photographer
Authority file	: Q117488166

Licensing[edit]

	This file is in the public domain in the United States because it was solely created by NASA. NASA copyright policy states that "NASA material is not protected by copyright unless noted". (See Template:PD-USGov, NASA copyright policy page or JPL Image Use Policy.)
	Warnings: Use of NASA logos, insignia and emblems is restricted per U.S. law 14 CFR 1221. The NASA website hosts a large number of images from the Soviet/Russian space agency, and other non-American space agencies. These are not necessarily in the public domain. Materials based on Hubble Space Telescope data may be copyrighted if they are not explicitly produced by the STScI.[1] See also {{PD-Hubble}} and {{Cc-Hubble}}. The SOHO (ESA & NASA) joint project implies that all materials created by its probe are copyrighted and require permission for commercial non-educational use. [2] Images featured on the Astronomy Picture of the Day (APOD) web site may be copyrighted. [3] The National Space Science Data Center (NSSDC) site has been known to host copyrighted content. Its photo gallery FAQ states that all of the images in the photo gallery are in the public domain "Unless otherwise noted."

File history

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Thumbnail	Dimensions	User	Comment
current	21:50, 18 January 2023		6,720 × 4,480 (20.11 MB)	OptimusPrimeBot (talk \| contribs)	#Spacemedia - Upload of http://images-assets.nasa.gov/image/KSC-20220728-PH-FMX02_0074/KSC-20220728-PH-FMX02_0074~orig.jpg via Commons:Spacemedia

You cannot overwrite this file.

File usage on Commons

There are no pages that use this file.

Metadata

This file contains additional information such as Exif metadata which may have been added by the digital camera, scanner, or software program used to create or digitize it. If the file has been modified from its original state, some details such as the timestamp may not fully reflect those of the original file. The timestamp is only as accurate as the clock in the camera, and it may be completely wrong.

Camera manufacturer	Canon
Camera model	Canon EOS 5D Mark IV
Author	NASA/Frank Michaux
Copyright holder	For copyright and restrictions, refer to http://www.nasa.gov/multimedia/guidelines/index.html
Exposure time	1/80 sec (0.0125)
F-number	f/2.8
ISO speed rating	2,500
Date and time of data generation	16:28, 28 July 2022
Lens focal length	16 mm
Label	Approved
Headline	AFS-8/101
Credit/Provider	NASA/Frank Michaux
Source	Digital Still Image
Short title	REACT Demonstration
Image title	Materials engineer Thomas Lipscomb tests a 3D printer on July 28, 2022, at Swamp Works at NASA’s Kennedy Space Center in Florida, as part of the Relevant Environment Additive Construction Technology (REACT) project. Among the key objectives of the project is developing an architectural and structural design for a shelter that provides protection to habitable assets on the lunar surface. Testing REACT derives from NASA’s 2020 Announcement of Collaboration Opportunity with AI SpaceFactory – an architectural and construction technology company and winner of NASA’s 3D Printed Habitat Challenge.
Usage terms	PAO Approved For Release
City shown	KSC
Orientation	Normal
Horizontal resolution	240 dpi
Vertical resolution	240 dpi
Software used	Adobe Photoshop Lightroom Classic 11.4.1 (Windows)
File change date and time	11:43, 29 July 2022
Exposure Program	Manual
Exif version	2.31
Date and time of digitizing	16:28, 28 July 2022
APEX shutter speed	6.321928
APEX aperture	2.970854
APEX exposure bias	0
Maximum land aperture	3 APEX (f/2.83)
Metering mode	Pattern
Flash	Flash did not fire, compulsory flash suppression
DateTimeOriginal subseconds	88
DateTimeDigitized subseconds	88
Color space	sRGB
Focal plane X resolution	1,866.6666564941
Focal plane Y resolution	1,866.6666564941
Focal plane resolution unit	3
Custom image processing	Normal process
Exposure mode	Manual exposure
White balance	Auto white balance
Scene capture type	Standard
Serial number of camera	032022002392
Lens used	EF16-35mm f/2.8L III USM
Date metadata was last modified	09:00, 3 August 2022
Special instructions	07/28/2029
Unique ID of original document	F66E7D8067F93812314BC4AE02295D96
Keywords	3D printing AI SpaceFactory Artemis GMRO Granular Mechanics and Regolith Operations KSC Kennedy Space Center NASA Relevant Environment Additive Construction Technology (REACT) automation habitat lunar construction space tech testing
Sublocation of city shown	Swamp Works
IIM version	4

File:REACT Demonstration (KSC-20220728-PH-FMX02 0074).jpeg

Captions

Captions

Summary[edit]

Licensing[edit]

File history

File usage on Commons

Metadata

Structured data

Items portrayed in this file

depicts

inception

28 July 2022

captured with

Canon EOS 5D Mark IV

exposure time

0.0125 second

f-number

2.8

focal length

16 millimetre

ISO speed

2,500

MIME type

image/jpeg

instance of

photograph

Navigation menu

File:REACT Demonstration (KSC-20220728-PH-FMX02 0074).jpeg

Captions

Captions

Summary[edit]

Licensing[edit]

File history

File usage on Commons

Metadata

Navigation menu

Search