File:NLC416-08jh003202-26141 鍛造制模工藝學.pdf

From Wikimedia Commons, the free media repository
Jump to navigation Jump to search
Go to page
next page →
next page →
next page →

Original file(856 × 1,168 pixels, file size: 6.35 MB, MIME type: application/pdf, 270 pages)

Captions

Captions

Add a one-line explanation of what this file represents

Summary[edit]

鍛造制模工藝學   (Wikidata search (Cirrus search) Wikidata query (SPARQL)  Create new Wikidata item based on this file)
Author
尤乙照 鄧繼禹合編
image of artwork listed in title parameter on this page
Title
鍛造制模工藝學
Publisher
國立北京大學工學院[發行]
Description

目錄
第一編 鍛造工藝學
第一章 鍛造,用料之選擇
1 說明鍛造
2 鍛造用料
3 熟鐵及鋼之製造
4 鐵與銅之組織
顆粒
純鐵
熱鐵

5 鋼之識別
顯威鏡分晰
火花試驗
斷折試驗
6 鋼內之雜質





特種元素
氧化物及雜質
7 鋼鐵內碳之融合,凝結及熔解
臨界溫度
臨界點之位置
臨界點之原因
組織變更
結晶
(hypo-eutectoid)鋼
(eutectoid)鋼
(hypereutectoid)鋼
鑄錠
第二章 鍛工廠設備
1 加熱裝置
鍛鐵爐
熱爐
2 普通工具
手錘
雙手錘
鐵砧
鐵鉗
縮削錘
型錘
套錘
熱鏨子 冷鏨子 及砧鏨子
型塊
他種工具
測度
3 鐵械工具
落錘
氣錘
汽錘
錘鏨
型錘
板梢及低槽工具
壓機
彎鐵機
膨徑機
輥壓設備
起重機
第三章 鍛造之影響
1 鍛造之冶金影響
ia,熱鍛
化學成分變更
分子分布變更
顆粒大小變更
鍛造溫度
加熱太急
外部太冷
ib.冷鍛
2 鍛造之機械影響
成形
修整
引伸
膨徑
沖孔
彎成角形
彎成方角
彎成圈形
彎成眼孔
扭轉
3 鍛件之強度
第四章 應需材料之計算
1 計算法
2 角形及彎曲形
角形
圓形
u形
環形
雙環形
鍛接裕度
3 不整形
加工
曲軸
雙曲軸
連杆端
關節
義形連杆
義形搬子
窩臼樓子
分裂工作
擴張眼孔
無接圈
鍛造轂
起動杆
第五章 鍛接及焊合
鍛接
1 鍛接之總綱
鍛接之定義
燃料
鍛接熱
鐵鱗
熔劑
造成接合斜面
鍛接方法
2 堆接鍛
3 搭接鍛
扁件搭接鍛
圓件搭接鍛
煉環
4 對接鍛
跳接鍛
5 義接鍛
厚件義接鍛
6 鍛接工具鋼
7 機械鍛接
8 鍛接中之顆粒
焊合
9 焊合之本性
10 錫焊合
11 黃銅焊合
第六章 各種鍛造
普話鍛造
1 起重鈎
2 螺訂頭
3 鐵勺
煉止
冷縮配合
管之彎曲
汽錘工作
特種無接圈
平鈑上之轂形
圓拔梢形
車輛用縱橫杆吊承
3 複雜工作
有向內彎端之片環
盤簧
4 型打鍛造
材料之檢驗
所用型模
5 工具鍛造
冷〓子
岬鏨
圓鼻碹刀
切刀
碹孔刀
金剛石尖刀
邊刀
修整刀
平鑽
第七章 熱處理
1 韌鍛
正常化
球形化
經冷鍛之鋼
2 硬鍛
據哈鳥氏
淬火
3 強鍛
氧化鐵顏色
4 硬鍛與強鍛合併舉行法
5 高速鋼及其熱處理
6 表面硬化
〓化鉀表面硬化法
骨粉表面硬化法
部份表面加硬化法
7 氮化
8 由熱處理增加強度
第二編 制模工藝學
第一章 材料及工具
ⅰ 引言
ⅱ 制模用材料
1 所用木料
干木法
(a) 自然干木法
(b) 水中干木法
(c) 蒸氣干木法
(d) 熱空氣干木法
(e) 熱油干木法
2 木之收縮
3 辨別木材良否之法如下
4 木之朽腐
5 木之保存法
6 木之乾濕檢定法
7 所用金屬
8 木料之變形
ⅲ 制模用工具
1 切削手工具
縱鋸
背鋸
規鋸
中國鋸

平刨
單線刨
圓刨
軸刨
扁〓
掘〓
圓〓
鑽孔工具
2 測度工具
斜規

分劃工具
劃規
分規
梁規
徑規
3 雜項小工具
手錘
趕錐
剪鉗
木銼
油石
磨石
4 機械工具
木工碹床
碹床用之平面板
碹床用之圓〓
碹床用之斜〓
碹床用之刮刀
圓鋸機械
帶鋸機械
手刨床
切削機械
萬能木工洗床
金屬工作機械
第二章 制型實際工作及鑄模構造裕度
ⅰ 制型實際工作
1 普通制型法
型框之使用
中空鑄件之型心
分離模之制型法
2 上型突出以就實形模法
簡單圓柱體
有輻輪
有孔軸箱蓋
困難模之制型法
(1) 用濕砂圈者
(2) 用散件模者
(3) 用干砂型心者
ⅱ 鑄模構造之裕度
1 冷縮
2 拔模斜度
拔模斜度之變量
拔模斜度之樣板
3 修整
4 酌定裕度之實例
第三章 簡單實形模
ⅰ 整塊模
1 用濕砂型心者
型心
2 代表式之製造
用干砂型心之襯套
3 模之成形工作
4 型心匣之製造法
切削圓柱形部法
直角法
碹削拔削部法
公認之較妥善法
5 完成工作
塗蟲膠漆片
砂紙研磨
塗顏色
最後修整工作
ⅱ 分離模
1 假設之條件
2 製造方法
安裝合訂
應注意各點
需要耐久之構造
型心匣
完成工作
ⅲ 連繫方法
1 膠合
釘之使用
膠之種類
調製
敷膠
2 夾住
螺旋鋏之使用
壓力之調整
第四章 組合模及平背模
a 組合模
ⅰ 副軸皮帶輪
1 對於特別尺寸者之構造
尺寸內之裕度
2 輪輻
接筍
區劃
成形
3 輪輞構造
4 散轂之使用
內圓角
5 型心座
ⅱ 標準皮帶輪
1 構造方法
鐵輞模
2 輞之母模
冷縮裕度
構造
3 輪輻
形式
尺寸
4 提型板
使用
木模
5 轂
6 起模板
安置
7 標準型心座
庫存尺寸
8 散件之標記
9 模上之字
ⅲ 用大型心制型之皮帶輪
1 制型法
2 輻型心
3 轂端型心
4 突緣型心座
5 轉刮板
6 制型法
b 平背模
ⅰ 實形引擎曲柄
1 構造
ⅱ 圓盤曲柄
1 構造
圓盤


均衡重
內圓角
ⅲ 內圓角
1 習用
2 冷縮效應
3 種類

臘及芬
油灰
4 尺寸
第五章 經濟製造法及複雜型心法
a 經濟製造法
ⅰ 用干砂型心以減機械工作之例
1 平面板
型心座在下型框內
構造,腹
制型
ⅱ 簡化工作之例
1 丁字管接
端部連繫法
裝制於旋床法
連結
型心匣
a 肘管接
雙模
型心匣
支持之型心
2 回管結
3 螺旋夾盤
4 深突緣
木料之準備
5 大圓柱體
中空製造法
b 複雜型心法
ⅰ 球形瓣
1 球形之構造
樣板之使用
2 球形之支體
3 二部分型心
4 烘乾用架
5 填料函及機帽
型心匣
烘乾用圈
6 各種小件
ⅱ 汽機汽缸
1 模之式樣
2 汽櫃模
3 型心匣
汽缸
汽櫃
出汽路
汽路
4 製造之便利
分離汽櫃
第六章 正齒輪,斜齒輪及柱
ⅰ 正齒輪
1 需要準確之齒
機械制齒
2 齒
形式
連繫方法
3 輞及輻
4 制齒
分成齒之位間
齒樣板
鋸割及切削
5 實心小齒輪
ⅱ 斜齒輪
1 組合構造
2 輞
3 輻
散件
4 齒之配合
中心線曲尺之使用
連繫
樣板
ⅲ 柱
1 模
2 型心
3 墊模板
第七章 濕砂型心匣,空心模圈,貼型板
ⅰ 濕砂型心匣
1 濕砂型心法之適宜範圍
2 管之模
3 濕砂型心匣
型心匣之構造
支模襯之使用柄
小軸
ⅱ 空心模圈
1 特性製造
輥軸模
制模板
空心模圖
2 型框製造
中型框
下型框
上型框
內型心
ⅲ 貼模板
1 模之裝置
貼模板之尺寸
2 嵌模板

Language Chinese
Publication date 民國29[1940]
Source
institution QS:P195,Q732353
(民國時期文獻 民國圖書)
主題
InfoField
鍛模
中圖分類
InfoField
TG315.2
載體形態
InfoField
256頁

Licensing[edit]

This image is in the public domain because it is a mere mechanical scan or photocopy of a public domain original, or – from the available evidence – is so similar to such a scan or photocopy that no copyright protection can be expected to arise. The original itself is in the public domain for the following reason:
Public domain
This image is now in the public domain in China because its term of copyright has expired.

According to copyright laws of the People's Republic of China (with legal jurisdiction in the mainland only, excluding Hong Kong and Macao), amended November 11, 2020, Works of legal persons or organizations without legal personality, or service works, or audiovisual works, enter the public domain 50 years after they were first published, or if unpublished 50 years from creation. For photography works of natural persons whose copyright protection period expires before June 1, 2021 belong to the public domain. All other works of natural persons enter the public domain 50 years after the death of the creator.
According to copyright laws of Republic of China (currently with jurisdiction in Taiwan, Penghu, Kinmen, Matsu, etc.), all photographs and cinematographic works, and all works whose copyright holder is a juristic person, enter the public domain 50 years after they were first published, or if unpublished 50 years from creation, and all other applicable works enter the public domain 50 years after the death of the creator.

Important note: Works of foreign (non-U.S.) origin must be out of copyright or freely licensed in both their home country and the United States in order to be accepted on Commons. Works of Chinese origin that have entered the public domain in the U.S. due to certain circumstances (such as publication in noncompliance with U.S. copyright formalities) may have had their U.S. copyright restored under the Uruguay Round Agreements Act (URAA) if the work was under copyright in its country of origin on the date that the URAA took effect in that country. (For the People's Republic of China, the URAA took effect on January 1, 1996. For the Republic of China (ROC), the URAA took effect on January 1, 2002.[1])
To uploader: Please provide where the image was first published and who created it or held its copyright.

You must also include a United States public domain tag to indicate why this work is in the public domain in the United States. Note that this work might not be in the public domain in countries that do not apply the rule of the shorter term and have copyright terms longer than life of the author plus 50 years. In particular, Mexico is 100 years, Jamaica is 95 years, Colombia is 80 years, Guatemala and Samoa are 75 years, Switzerland and the United States are 70 years, and Venezuela is 60 years.


čeština  Deutsch  English  português  română  slovenščina  Tagalog  Tiếng Việt  македонски  русский  മലയാളം  ไทย  한국어  日本語  简体中文‎  繁體中文  +/−



This tag is designed for use where there may be a need to assert that any enhancements (eg brightness, contrast, colour-matching, sharpening) are in themselves insufficiently creative to generate a new copyright. It can be used where it is unknown whether any enhancements have been made, as well as when the enhancements are clear but insufficient. For known raw unenhanced scans you can use an appropriate {{PD-old}} tag instead. For usage, see Commons:When to use the PD-scan tag.


Note: This tag applies to scans and photocopies only. For photographs of public domain originals taken from afar, {{PD-Art}} may be applicable. See Commons:When to use the PD-Art tag.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current20:19, 10 June 2023Thumbnail for version as of 20:19, 10 June 2023856 × 1,168, 270 pages (6.35 MB)PencakeBot (talk | contribs)Upload 鍛造制模工藝學 (1/1) by 尤乙照,鄧繼禹合編 (batch task; nlc:data_416,08jh003202,26141; 民國圖書.3; 鍛造制模工藝學)

The following page uses this file:

Metadata