File:NLC416-13jh007392-70715 硫酸製造法.pdf

From Wikimedia Commons, the free media repository
Jump to navigation Jump to search
Go to page
next page →
next page →
next page →

Original file(810 × 1,133 pixels, file size: 10.09 MB, MIME type: application/pdf, 294 pages)

Captions

Captions

Add a one-line explanation of what this file represents

Summary[edit]

硫酸製造法   (Wikidata search (Cirrus search) Wikidata query (SPARQL)  Create new Wikidata item based on this file)
Author
李敦化著
image of artwork listed in title parameter on this page
Title
硫酸製造法
Publisher
商務印書館[發行者]
Description

目錄
第一編 原料及二氧化硫氣之製造
第一章 總論
第一節 硫酸工業發達史
第二節 中國硫酸業現狀
第三節 製造方法之類別
第二章 原料
第一節 通論
第二節 硫黃
第三節 硫化金屬礦
第四節 硫化雜礦及礦煙之利用
第五節 淨硫劑(spent oxide from gas works)
第六節 補助原料
第三章 硫黃氧化物及其酸類之性質與試驗
第一節 硫酸工業上應用之硫黃氧化物
第二節 硫酸之性質
第四章 二氧化硫氣之製造
第一節 概說
第二節 以硫黃為原料的製法
第三節 以硫鐵礦為原料的製法
第四節 以硫鋅礦為原料的製法
第五節 硫化貧礦及其他含硫原料之焙燒
第六節 礦塵之清除
第七節 焚硫爐及焚礦爐發出氣體的成分
第五章 原料爐氣及硫酸等試驗法
第一節 硫磺試驗法
第二節 硫化鐵礦試驗法
第三節 硫化鋅礦試驗法
第四節 淨硫劑試驗法
第五節 智利硝試驗法
第六節 爐氣試驗法
第七節 燒礦試驗法
第八節 硫酸試驗法
第二編 鉛室硫酸製造法
第一章 總論
第一節 名稱之由來
第二節 鉛室制酸法的概要
第二章 鉛室
第一節 概說
第二節 鉛室建造用材料
第三節 鉛室的基礎工事與骨架
第四節 銲鉛法(lead burning)
第五節 鉛室構築法
第六節 鉛室的形狀
第七節 鉛室容積
第八節 鉛室容積分配法
第九節 鉛室系連絡法(connections)
第十節 鉛室附屬裝置(chamber fittings)
第十一節 鉛室之修理與拆毀
第三章 解路撒塔(gay-lussac tower)
第一節 氧化氮之收回(recovery of nitrogen oxides)
第二節 解路撒塔的構造
第三節 解路撒塔的容積
第四節 解路撒塔之充填
第五節 解路撒塔操業法
第六節 解路撒塔放出之廢氣(exit gas)
第四章 古老華塔(glover tower)
第一節 含硝硫酸之脫硝(denitration of nitrous sulphuricacid)
第二節 古老華塔之功用(function of glover tower)
第三節 構造用材料及填料(materials for construction and packing)
第四節 古老華塔的構造
第五節 古老華塔高度與容積
第六節 古老華塔操業法
第五章 酸循環系統(acid circulation system)
第一節 酸槽(acid tanks)
第二節 冷卻器(acid elevators)
第三節 送酸機(acid elevators)
第四節 喉管及酸瓣(pipe lines and valves)
第五節 塔酸分配裝置(acid distributor)
第六章 鉛室系通風(draught in chamber system)
第一節 自然的通風(natural draught)
第二節 機械的通風(mechanical draught)
第三節 通風調整器(regulator of draught)
第七章 鉛室系給水(water supply in chamber)
第一節 水蒸氣供給法
第二節 水花供給法
第三節 供給水花的設備
第四節 鉛室需要之水量
第五節 供給水花時應注意事項
第八章 鉛室給硝法(nitre supply in chamber)
第一節 硝石爐給硝法
第二節 用硝石溶液法
第三節 用硝酸方法
第四節 用混酸法
第五節 氨氧化法
第六節 給硝方法的比較
第九章 鉛室法中之各項試驗(testing in chamber process)
第一節 溫度表與高溫計
第二節 比重計(hgdrometers)
第三節 鉛室氣體試驗法(gas testing)
第四節 含氮酸類及其關聯物質之試驗
第五節 解路撒塔廢氣(exit gas)之試驗
第六節 通風之測驗(dranght measurements)
第十第 鉛室操業法(operation)
第一節 鉛室作業之比較標準
第二節 鉛室作業之開始與中止
第三節 鉛室系通風之調整
第四節 鉛室給水量的加減
第五節 給硝數量之調整
第六節 鉛室溫度(temperature of chamber)
第七節 循環酸量及其含硝度
第八節 鉛室硝石循環量(the equivalent quanlity of nitre cireulating in chamber system)
第九節 鉛室系內氧化氮損失之原因
第十節 鉛室作業之總述
第十一章 強力式作業及塔式制酸法
第一節 滯隅(dead corner)的利用
第二節 循環硝量增加法
第三節 反應塔及中間塔
第四節 鉛室作業法的改良
第五節 鉛室構造的改良
第六節 塔式制酸法
第七節 室塔混合法
第八節 低溫氣體的利用與捕硝裝置之擴大
第九節 攪拌式制酸裝置
第十節 時間係數(time factor)
第十二章 鉛室法硫酸生成之理論
第一節 初期理論
第二節 lunge氏理論
第三節 raschig理論
第四節 mueller氏新說
第五節 鉛室反應之變態
第六節 鉛室氣相反應的平衡及so〓變化率
第七節 鉛室系熱量平衡的精算
第三編 硫酸濃縮法
第一章 總論
第一節 製品與製法的分類
第二節 硫酸之蒸煮性質
第二章 鉛室硫酸精製法(purification of chamber acid)
第一節 鉛室酸中不純物
第二節 硫酸之混濁
第三節 硫酸中之砷質
第四節 鉛室酸中之硒質
第五節 砷質清除法
第六節 氧化氮除去法
第七節 其他精製法
第八節 爐氣預先精製法
第九節 純硫酸製造法(preparation of chemical pure sulphuric acid)
第三章 60°bé.硫酸製造法
第一節 古老華塔蒸煮法
第二節 鉛鍋蒸煮法
第四章 強硫酸製造法
第一節 玻璃蒸煮器(glass retort)
第二節 白金蒸煮器(platinum still)
第三節 鑄鐵製蒸煮鍋(cast iron still)
第四節 階段式蒸煮法(cascade system)
第五節 kessler式濃酸方法
第六節 gaillard式濃酸方法
第七節 gilchrist式濃酸方法
第八節 硫酸濃縮方法的比較
第五章 濃酸工廠酸霧清除法
第一節 氣體濾過器(gas filter)
第二節 calder-fox式高速濾過器
第三節 電氣凝酸法(electrical condensation)
第四節 酸務收捕方法的舉例
第六章 鉛室硫酸工廠之設計
第一節 設計時應考慮事項
第二節 工廠布置一般原則
第三節 鉛室設計的參考資料
第四節 鉛室工廠的配置圖例
第四編 接觸式硫酸製造法
第一章 總論
第一節 接觸法未實行以前舊式發煙硫酸製造法
第二節 接觸式製法發展之經過
第三節 接觸式制酸方法之概要
第二章 接觸制酸法理論
第一節 接觸氧化的一般原則
第二節 二氧化硫變化率
第三節 氧化鐵觸媒
第四節 釩觸媒
第五節 接觸作用與砷害
第三章 混合氣體精製法(purification of sulphur dioxide gas)
第一節 概說
第二節 混合氣體中存在之不純物及其影響
第三節 氣體精製的程序
第四節 氣體純度檢查法
第五節 裝置內氣體運行與動力分配
第四章 三氧化硫之製造
第一節 so〓之接觸氧化
第二節 觸媒擔體(base of carrier)
第三節 觸媒(catalyser)
第四節 濃度與溫度之調整
第五節 觸媒之復活(regeneration)
第六節 變化率之計算
第五章 三氧化硫之吸收
第一節 吸收用硫酸
第二節 吸收裝置
第三節 吸收操作
第六章 各種接觸制酸方法
第一節 b.a.s.f.法
第二節 tentelew chemischen fabrik接觸法
第三節 grillo-schroeder法
第四節 mannheim法
第五節 釩接觸法
第六節 其他接觸法
第七節 接觸式硫酸之淨制
第七章 接觸制酸法現狀及趨勢
第一節 接觸法的現況
第二節 各接觸法的比較
第三節 接觸法與鉛室法的聯合操業
第四節 接觸法與鉛室法製造費的比較
附錄
第一節 世界硫酸產額的統計
第二節 硫酸之容器及其載運法
第三節 硫酸用途
第四節 硫酸工業之副產物

Language Chinese
Publication date [1937]
Source
institution QS:P195,Q732353
(民國時期文獻 民國圖書)
館藏信息
InfoField
MG/TQ111.16/4
主題
InfoField
硫酸生產
中圖分類
InfoField
TQ111.16
載體形態
InfoField
268頁

Licensing[edit]

This image is in the public domain because it is a mere mechanical scan or photocopy of a public domain original, or – from the available evidence – is so similar to such a scan or photocopy that no copyright protection can be expected to arise. The original itself is in the public domain for the following reason:
Public domain
This image is now in the public domain in China because its term of copyright has expired.

According to copyright laws of the People's Republic of China (with legal jurisdiction in the mainland only, excluding Hong Kong and Macao), amended November 11, 2020, Works of legal persons or organizations without legal personality, or service works, or audiovisual works, enter the public domain 50 years after they were first published, or if unpublished 50 years from creation. For photography works of natural persons whose copyright protection period expires before June 1, 2021 belong to the public domain. All other works of natural persons enter the public domain 50 years after the death of the creator.
According to copyright laws of Republic of China (currently with jurisdiction in Taiwan, Penghu, Kinmen, Matsu, etc.), all photographs and cinematographic works, and all works whose copyright holder is a juristic person, enter the public domain 50 years after they were first published, or if unpublished 50 years from creation, and all other applicable works enter the public domain 50 years after the death of the creator.

Important note: Works of foreign (non-U.S.) origin must be out of copyright or freely licensed in both their home country and the United States in order to be accepted on Commons. Works of Chinese origin that have entered the public domain in the U.S. due to certain circumstances (such as publication in noncompliance with U.S. copyright formalities) may have had their U.S. copyright restored under the Uruguay Round Agreements Act (URAA) if the work was under copyright in its country of origin on the date that the URAA took effect in that country. (For the People's Republic of China, the URAA took effect on January 1, 1996. For the Republic of China (ROC), the URAA took effect on January 1, 2002.[1])
To uploader: Please provide where the image was first published and who created it or held its copyright.

You must also include a United States public domain tag to indicate why this work is in the public domain in the United States. Note that this work might not be in the public domain in countries that do not apply the rule of the shorter term and have copyright terms longer than life of the author plus 50 years. In particular, Mexico is 100 years, Jamaica is 95 years, Colombia is 80 years, Guatemala and Samoa are 75 years, Switzerland and the United States are 70 years, and Venezuela is 60 years.


čeština  Deutsch  English  português  română  slovenščina  Tagalog  Tiếng Việt  македонски  русский  മലയാളം  ไทย  한국어  日本語  简体中文‎  繁體中文  +/−



This tag is designed for use where there may be a need to assert that any enhancements (eg brightness, contrast, colour-matching, sharpening) are in themselves insufficiently creative to generate a new copyright. It can be used where it is unknown whether any enhancements have been made, as well as when the enhancements are clear but insufficient. For known raw unenhanced scans you can use an appropriate {{PD-old}} tag instead. For usage, see Commons:When to use the PD-scan tag.


Note: This tag applies to scans and photocopies only. For photographs of public domain originals taken from afar, {{PD-Art}} may be applicable. See Commons:When to use the PD-Art tag.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current20:10, 11 June 2023Thumbnail for version as of 20:10, 11 June 2023810 × 1,133, 294 pages (10.09 MB)PencakeBot (talk | contribs)Upload 硫酸製造法 (1/1) by 李敦化著 (batch task; nlc:data_416,13jh007392,70715; 民國圖書.7; 硫酸製造法)

The following page uses this file:

Metadata